Citation

Douglas CA, Fildes BN, Gibson TJ, Boström O, Pintar FA. Annu. Proc. Assoc. Adv. Automot. Med. 2007; 51: 319-339.

Affiliation

Monash University Accident Research Centre, Australia.

Copyright

(Copyright © 2007, Association for the Advancement of Automotive Medicine)

DOI

unavailable

PMID

18184500

PMCID

PMC3217521

Abstract

Seat belt interaction with a far-side occupant's shoulder and thorax is critical to governing excursion towards the struck-side of the vehicle in side impact. In this study, occupant-to-belt interaction was simulated using a modified MADYMO human model and finite element belts. Quasi-static tests with volunteers and dynamic sled tests with PMHS and WorldSID were used for model validation and comparison. Parameter studies were then undertaken to quantify the effect of impact direction, seat belt geometry and pretension on occupant-to-seat belt interaction. Results suggest that lowering the D-ring and increasing pretension reduces the likelihood of the belt slipping off the shoulder. Anthropometry was also shown to influence restraint provided by the shoulder belt. Furthermore, the belt may slip off the occupant's shoulder at impact angles greater than 40 degrees from frontal when no pretension is used. However, the addition of pretension allowed the shoulder to engage the belt in all impacts from 30 to 90 degrees.

Language: en