@article{ref1,
title="Influence of turbulent flow on the explosion parameters of micro- and nano-aluminum powder-air mixtures",
journal="Journal of hazardous materials",
year="2015",
author="Liu, Xueling and Zhang, Qi",
volume="299",
number="",
pages="603-617",
abstract="The environmental turbulence intensity has a significant influence on the explosion parameters of both micro- and nano-Al at the time of ignition. However, explosion research on turbulence intensity with respect to micro- and nano-Al powders is still insufficient. In this work, micro- and nano-aluminum powders were investigated via scanning electron microscopy (SEM), and their particle size distributions were measured using a laser diffraction analyzer under dispersing air pressures of 0.4, 0.6, and 0.8MPa in a 20L cylindrical, strong plexiglass vessel. The particle size distributions in three different mass ratio mixtures of micro- and nano-Al powders (micro-Al:nano-Al[massratio]=95:5, 90:10, and 85:15) were also measured. The results show that the agglomerate size of nano-Al powder is an order of magnitude larger than the nanoparticles' actual size. Furthermore, the turbulence intensity ranges (Urms) of the Al powder-air mixtures were measured using particle image velocimetry (PIV) under dispersing air pressures of 0.4, 0.6, and 0.8MPa. The effect of turbulence intensity on the explosion characteristics of the micro- and nano-Al powders was investigated using a 20L cylindrical explosion vessel. The results of micro-Al and nano-Al powder-air mixtures with a stoichiometric concentration of 337.00g·m(-3) were discussed for the maximum explosion pressure, the maximum rate of pressure increase and the maximum effective burning velocity under the different turbulence intensity.<p /> <p>Language: en</p>",
language="en",
issn="0304-3894",
doi="10.1016/j.jhazmat.2015.07.068",
url="http://dx.doi.org/10.1016/j.jhazmat.2015.07.068"
}