TY  - JOUR
PY  - 2017//
TI  - Experimental studies on the effects of spacing on upward flame spread over thin PMMA
JO  - Fire technology
A1  - Zhu, Hui
A1  - Zhu, Guoqing
A1  - Gao, Yunji
A1  - Zhao, Guoxiang
SP  - 673
EP  - 693
VL  - 53
IS  - 2
N2  - Experiments were carried out to study the effect of spacing between wall and thin fuels on upward flame spread. The front flame height, back flame height, pyrolysis height, burnout length, and pyrolysis spread rate were measured by video image analysis with spacings of 2 mm, 7 mm, 13 mm, 19 mm, and 25 mm. Experiments were performed on uniform PMMA (polymethyl-methacrylate) samples with 200 mm height, 50 mm width, and 1 mm thickness. The results are as follows: (1) As the spacing increased, the front flame height, back flame height, pyrolysis height, and burnout length showed the same trajectory, first increased and then decreased. The maximum trajectory was observed at a spacing of 6.5% of the wall height. (2) At an infinite length of PMMA, the pyrolysis zone and pyrolysis spread rate would reach an asymptotic steady state, and the pyrolysis and burnout spread rates will be asymptotically equal. (3) Of particular interest is the maximum mass-loss rate for a wall spacing/sample height ratio (0.065) due to enhanced the radiation fluxes. In this study, the effects of spacing between wall and fuels on upward flame spread was investigated for the first time using 1 mm thick PMMA sheets, including two-face burning case.<p />  <p>Language: en</p>
LA  - en
SN  - 0015-2684
UR  - http://dx.doi.org/10.1007/s10694-016-0590-6
ID  - ref1
ER  -