Article Title,Year,Volume,Issue,Page Range,Author
Flame Retarded Polypropylene: A Comparison of Large Scale and Small Scale Tests,1980,4,2,87-91,Abbott
Application of Oxygen-Consumption Calorimetry to Non-Combustibility Testing,1985,9,3,135-144,Weckman
Toxicity of Teflon. Similar results obtained with radiant convective heat-sources or in the hot fire gases,1984,8,1,54-55,Stock
Smoke and Toxicant Production During Thermal Degradation,1986,10,2,71-77,Alexeeff
Fire Safety Analysis for Public Mass Transit Trains,1979,3,2,84-90,Allender
Specification of Combustible Materials for Passenger Train Design,1984,8,3,113-124,Allender
Importance of Cyanide and Organic Nitriles in Fire Fatalities,1979,3,2,91-99,Anderson
Fire Deaths in the United Kingdom 1976-82,1983,7,2,67-72,Anderson
Use of Experimental Materials to Assess Toxicological Tests for Rating Polymeric Materials Under Thermal Stress,1978,2,3,136-140,Alarie
Fire Behavior of Upholstered Furniture -- An Experimental Study,1985,9,1,41-45,Andersson
Post-Flashover Compartment Fires: The Basis of a Theoretical-Model,1978,2,2,39-53,Williamson
Post-Flashover Compartment Fires:  Application of a Theoretical Model,1979,3,1,1-7,Williamson
Flame lengths under ceilings,1980,4,3,119-126,Babrauskas
Development of the Cone Calorimeter: A Bench Scale Heat Release Rate Apparatus Based on Oxygen Consumption,1984,8,2,81-95,Babrauskas
Ignitability Measurements with the Cone Calorimeter,1987,11,1,31-43,Babrauskas
Effect of Halogenated Fire Extinguishants on the Self-Ignition of Polyolefins,1978,2,3,132-135,Baillet
The Role of Nitrogen in Nitrogen Phosphorus Synergism,1982,6,1,10-12,Kosik
Smoke Dilution Methods for the Evaluation of the Smoke Emission from Burning Polymers - A Comparative Approach,1981,5,2,61-65,Ballistreri
Harmonization of Structural Fire Precautions in Europe -- The Current Situation and Projected Measures,1979,3,1,23-26,Becker
Test Methods and Standards: Fire Performance of Products,1984,8,2,64-68,Becker
Predicting Flash Fire Protection of Clothing from Laboratory Tests Using Second-Degree Burn to Rate Performance,1984,8,2,57-63,Behnke
Protective Clothing: Evaluation of Zirpro Wool and Other Fabrics,1979,3,3,156-166,Phillips
Zirpro Wool Textiles,1984,8,4,183-195,Benisek
Apparatus for the Determination of the Ignition Time of Fabrics,1979,3,2,106-109,Bernskiold
A Fire Fatality Study,1979,3,4,211-217,Caplan
Combustion product toxicity: dependence on the mode of product generation -- toxicity of Teflon. Similar results obtained with radiant-convective heat sources or in hot gases -- reply,1984,8,1,56-56,Birky
Toxicity and Incapacitation Due to Hydrogen Chloride,1986,10,3-4,125-132,Birky
Combustion products of polymeric materials IV. Testing of toxicity hazard,1986,10,1,1-6,Blahuskova
Modeling of Furniture Experiments with Zone Models,1985,9,2,81-87,Andersson
Polyesters - A Review of the Literature on Products of Combustion and Toxicity,1986,10,3-4,107-123,Levin
Fire Testing Flat Roofs and Wall Linings with Point Fire Sources,1979,3,3,148-153,Brein
A Two Zone Model of Flame Propagation Applied to H2 + Air Flames and HCL Inhibited Flames,1978,2,3,117-121,Brown
A Computational Study of Physical and Chemical Inhibition in a Perfectly Stirred Reactor,1981,5,1,14-23,Brown
Combustion Characteristics of UPVC Pipe Grade Materials,1979,3,1,8-14,Brown
Toxic gas and smoke measurement with the British fire propagation test II. Hydrogen-chloride evolution from upvc building products,1985,9,2,95-102,Brown
Toxic gas and smoke measurement with the British fire propagation test I. Test conditions,1985,9,2,88-94,Brown
Thermal Conditions to Produce Skin Burns,1979,3,2,100-105,Bull
Smoke Characteristics of Coal-Lined Tunnel Fires,1981,5,2,47-51,Litton
Smoke Formation from Burning Polystyrene and Its Suppression,1983,7,1,25-31,Chalabi
The Thermal-Decomposition of Polyurethanes and Polyisocyanurates,1981,5,4,133-141,Chambers
A Method for Measuring Combustion Intermittency in Fires,1979,3,4,238-242,Cox
Fast Surface Temperature Measurement for Fire Tests,1984,8,4,217-223,Chitty
Legislation in the United Kingdom Relating to Plastics Polymers and Textiles,1980,4,1,28-36,Christian
Home Office Legislation Regulations and Controls in the UK in Respect of Premises Within the Scope of the Fire Precautions Act 1971,1984,8,1,49-53,Christian
Correlation of Smoke and Fumes from Overheated Materials in an Aircraft Fuselage and in a Laboratory Test Apparatus,1983,7,3,132-149,Christopher
Radiative Ignition of Thermoplastic and Charforming Materials,1984,8,4,196-198,Clark
Assessment of Smoke Density with a Helium-Neon Laser,1985,9,1,30-35,Clark
Textiles Fire and Test Standards -- A Polemic,1979,3,4,232-237,Clegg
Measuring the Leakage of Door Assemblies During Standard Fire Exposures,1981,5,4,163-174,Cooper
A Mathematical Model for Estimating Available Safe Egress Time in Fires,1982,6,3-4,135-144,Cooper
Some Stochastic Properties of Fire Plumes,1982,6,3-4,127-134,Cox
The Formation of NOx from Nitrogen-Containing Materials in Diffusion Flames,1983,7,2,62-66,Crowhurst
The Thermal Expansion of Portland Cement Paste Mortar and Concrete at High Temperatures,1980,4,2,66-70,Gillen
An Investigation of the Flame Retardant and Smoke Suppressant Properties of Tin(Iv) Oxide in Unsaturated Polyester Thermosets,1986,10,1,41-46,Cusack
High Temperature Oxygen Index Studies of Halogenated Polyester Thermosets Containing Antimony and Molybdenum Oxides,1982,6,3-4,122-126,Das
Thermal Degradation Studies of Molybdenum Containing Polyester Thermosets,1983,7,1,41-48,Das
Flammability Limits of the Polymer Pyrolysates Generated from Flame Retarded Poly(Ethylene-Terephthalate),1983,7,3,150-156,Day
Flammability testing state-of-the-art,1985,9,2,75-80,Deris
Effect of Pyrolysis and Combustion Temperatures on Smoke Density,1978,2,1,11-17,Edgerley
Further Variations of Smoke Density with Heat Flux,1980,4,2,104-108,Edgerley
The Oxidative Pyrolysis of Plastics,1980,4,2,77-82,Edgerley
Toxic Gas Tests in Perspective,1982,6,2,72-75,Edgerley
Ignition Resistant Upholstery by Coating Pu Flexible Foam with Vinylidene-Chloride Co-Polymers,1983,7,3,119-122,Edgerley
Faults in Fire Extinguishers,1979,3,3,121-125,Emson
The Extinction of Hydrocarbon Flames Based on the Heat Absorption Processes Which Occur in Them,1984,8,3,148-156,Hughes
Chemical Fingerprint Studies of Fire Atmospheres,1986,10,1,21-28,Murrell
Biological End Points for the Assessment of the Toxicity of the Products of Combustion of Materials,1980,4,1,50-58,Farrar
Developing Flame Retarded Plastics -- New Guidance Wanted,1979,3,3,167-170,Fischer
Quantification of Threat from a Rapidly Growing Fire in Terms of Relative Material Properties,1978,2,1,27-33,Friedman
Movement of Destruction Products Through the Carbonized Layer Upon Combustion of Polymers,1986,10,3-4,133-135,Gibov
Short-Term Creep of Concrete at Elevated-Temperatures,1981,5,4,142-148,Gillen
Standards for the Fire Hazard of Clothing - The Australian Experience,1978,2,4,163-172,Gordon
The Effect of Elevated Temperature on Flame-Retardant Treated Wools and Other Fibers,1986,10,3-4,137-140,Gordon
Structure and Radiation Properties of Large Scale Natural Gas Air Diffusion Flames,1986,10,3-4,161-169,Evans
Effect of Calcium-Carbonate Filler on the Fire and Smoke Properties of Molded Polypropylene,1984,8,3,125-136,Smith
Progress on Fire Safety Standards: Fire Standards Activities in the ASTM,1981,5,4,177-178,Gross
A Room Fire Simulation Model,1984,8,2,105-111,Hagglund
A Practical Method for the Calculation of the Non-Steady Temperature Fields in Solid Bodies,1985,9,3,150-154,Haksever
Relationship Between Fire Resistance and Fire Tolerance,1978,2,4,154-162,Harmathy
Effect of the Nature of Fuel on the Characteristics of Fully-Developed Compartment Fires,1979,3,1,49-60,Harmathy
The Possibility of Characterizing the Severity of Fires by A Single Parameter,1980,4,2,71-76,Harmathy
Fire Performance Standards and the Problem of Fire Risk Assessment,1980,4,4,173-176,Harmathy
The Fire Resistance Test and its relation to real-world fires,1981,5,3,112-122,Harmathy
Normalized Heat Load: A Key Parameter in Fire Safety Design,1982,6,1,27-31,Harmathy
The Delphi Method: A Complement to Research,1982,6,2,76-79,Harmathy
Post-Flashover Compartment Fires,1983,7,2,49-61,Harmathy
On the Potential for Fire Spread,1984,8,3,173-174,Harmathy
Burning Pyrolysis Combustion and Charoxidation - Need for Clarifying Terminology,1984,8,4,224-226,Harmathy
A Suggested Logic for Trading Between Fire-Safety Measures,1986,10,3-4,141-143,Harmathy
On the Equivalent Fire Exposure,1987,11,2,95-104,Harmathy
An Assessment of the Toxic Hazards of Smoke -- Toxicological Potency and Intoxication Rate Thresholds,1983,7,3,128-131,Hartzell
Calculation of a Toxicity Index for Materials Based on A Biological Evaluation Method,1978,2,1,7-10,Herpol
Biological Evaluation of Toxicity Caused by Combustion of Building Materials,1980,4,3,127-143,Herpol
Comparative Study of the Toxicity of Combustion Products from Flame-Retardant and Untreated Materials,1983,7,4,193-201,Herpol
Relative Toxicity of Pyrolysis Gases from Materials - Effects of Chemical Composition and Test Conditions,1978,2,2,68-79,Hilado
Ignition and Flash-Fire Studies of Cellulosic Materials,1978,2,4,173-176,Hilado
Relative Toxicity of Pyrolysis Gases from Materials -- Specific Toxicants and Special Studies,1978,2,4,141-153,Hilado
Relative Toxicity of Pyrolysis Gases from Materials - Effects of Temperature Air-Flow and Criteria,1979,3,4,183-187,Hilado
Combustion Products from Burning Wool Fabric,1983,7,4,210-215,Hodgkin
Rate of Heat Release Measurements with the Swedish Box Test,1984,8,1,20-27,Holmstedt
The Persistence of Burning of Textiles in Different Oxygen Environments and the Determination of the Extinction Oxygen Index,1983,7,3,111-118,Horrocks
The Use of DTA to Study Spontaneous Ignition of Cellulose,1985,9,2,57-64,Davies
An Estimation of Rate of Heat Release by Means of Oxygen Consumption Measurements,1980,4,2,61-65,Huggett
Acidic Volatiles from Overheated Polymeric Materials,1985,9,3,120-124,Christopher
An Ignition Test for Plastics,1980,4,4,201-202,Hunter
Performance of Zinc Oxide Single-Crystal Semiconductor Gas Sensors in an Experimental Mine Roadway,1985,9,1,23-29,Mann
Analysis of Gases Evolved from Heated Coal Wood and PVC Conveyor Belt and Their Effect on Zinc-Oxide Single-Crystal Semiconductor Gas Sensors,1985,9,1,9-22,Mann
A Review of Products Evolved from Heated Coal Wood and PVC,1985,9,1,1-8,Hurst
Heat of Dehydration of Alumina-Trihydrate,1978,2,1,37-38,Jones
The Fire Performance of a Ventilated Facade Insulated with a B2-Classified Rigid Polyurethane Foam,1986,10,2,79-89,Prager
The Critical Oxygen Index Test As a Potential Screening Test for Aerospace Materials,1981,5,4,175-176,Meehan
Fire Test Behavior of Various Crystal Types of Melamine Phosphate in Intumescent Formulations,1982,6,3-4,119-121,Kay
A Fire Test Device Suitable for Small-Scale Testing of Fire Retardant Coatings,1982,6,3-4,111-118,Kay
Effect of Diammonium Phosphate on the Flammability of Wood and Wood-Polymethylmethacrylate Composites,1980,4,3,115-118,Kishore
Heat Transfer During Polymer Combustion,1981,5,3,128-130,Kishore
Action of Phosphorus-Compounds on Fire-Retardancy of Cellulosic Materials -- A Review,1982,6,2,54-58,Kishore
Effect of Oxygen Flow Rate and Dripping on the Linear Regression Rate of Polystyrene,1983,7,1,38-40,Kishore
Textile Flammability Testing: Appropriate Levels for Moisture Content of Specimens,1982,6,1,38-41,Krasny
New Laboratory Combustion Method for the Investigation of Volatile Combustion Products Emitted by Fires Involving Industrial-Chemicals,1985,9,2,108-108,Kubler
Mathematical Modeling of Natural Convection in Fire: A State of the Art Review of the Field Modeling of Variable Density Turbulent Flow,1983,7,1,1-24,Kumar
A New Experimental Method to Predict the Development of a Fire,1980,4,1,42-44,Laouisset
Smoke Characteristics of Tunnel Wood Fires,1978,2,3,110-116,Lee
Generation of Hydrogen-Cyanide from Flexible Polyurethane Foam Decomposed Under Different Combustion Conditions,1985,9,3,125-134,Levin
Factors Affecting Temperature of Fire-Exposed Concrete Slabs,1979,3,2,74-79,Lie
A Procedure to Calculate Fire Resistance of Structural Members,1984,8,1,40-48,Lie
Statistics of Fires in Dwellings Involving Textiles in the United Kingdom,1983,7,4,202-209,Mahon
Effect of Turbulence on the Combustion of Gases,1978,2,3,85-101,Makepeace
Current Thinking and Developments in Fire Testing in Europe,1980,4,4,177-184,Malhotra
Measurement of smoke in fires - review I. characteristics of smoke,1978,2,1,2-6,Maries
Toxic Gas and Smoke Assessment Studies on Vinyl Floor Coverings with the Fire Propagation Test,1979,3,3,132-139,Martin
Australian Studies on Fire Hazard Tests for Internal Linings of Buildings,1979,3,4,202-210,Dowling
Australian Fire Tests in Standards and Regulations,1981,5,1,33-38,Dowling
Studies on the Measurement of Smoke Propensity of UPVC,1983,7,3,101-110,Martin
The Thermo-Oxidative Decomposition Ignition and Burning of Flame-Retarded Polystyrenes,1982,6,2,59-64,Masarik
Combustion Inhibition of Cellulose by Powders - Preliminary Data and Hypotheses,1981,5,2,66-72,Mccarter
The Influence of Sample Dimensions on the Critical Oxygen Index of Thin Polypropylene Films,1981,5,3,123-127,Mcilhagger
Failure Probabilities of Constructions Designed for Fire Resistance,1984,8,2,96-104,Harmathy
The Pyrolysis of Organic Nitriles,1983,7,4,185-192,Booth
The Formation of Hydrogen-Cyanide During Methacrylonitrile Pyrolysis,1987,11,1,45-47,Metcalfe
Major Pyrolysis and Thermoxidative Products from Certain Polyamides,1981,5,1,1-5,Michal
Determination of Carbon Monoxide in Thermal Degradation Products of Polymeric Materials,1981,5,4,149-152,Michal
Determination of Hydrogen Cyanide in Thermal-Degradation Products of Polymeric Materials,1982,6,1,13-15,Michal
Combustion Products of Polymeric Materials Versus Heat Released by Polymer Combustion in the Cab 650 Chamber,1987,11,2,105-108,Michal
Heat transfer from a buoyant smoke layer beneath a ceiling to a sprinkler spray ii. experiment,1979,3,1,34-38,Morgan
Heat transfer from a buoyant smoke layer beneath a ceiling to a sprinkler spray I. Tentative theory,1979,3,1,27-33,Morgan
The Early Fire Behavior of Combustible Wall Lining Materials,1980,4,4,165-172,Dowling
How Well Are We Measuring Smoke,1982,6,2,65-67,Mulholland
A Novel Method for Measuring Nitrogen-Containing Species in Combustion Effluents,1986,10,2,57-62,Murrell
Interactions Between Flame Retardants and Stabilizers in Polyethylene Systems,1978,2,2,63-67,Nagy
The Influence of Applied Heat-Flux on the Combustion of Epoxies,1983,7,4,216-218,Williams
The Behavior of Thermoset Polymers Under Fire Conditions,1983,7,2,89-95,Nolan
Larger Specimens for Determining Rate of Heat Release in the Cone Calorimeter,1986,10,3-4,151-160,Nussbaum
Flame-Retardant Paints,1984,8,1,17-19,Oneill
Ignitability as proposed by the International Standards Organization compared with some European fire tests for building panels,1981,5,4,153-162,Östman
A Review of the Literature on the Gaseous Products and Toxicity Generated from the Pyrolysis and Combustion of Rigid Polyurethane Foams,1987,11,1,1-29,Levin
The Conflagration of Two Large Department Stores in the Center of Athens,1986,10,3-4,171-177,Papaioannou
The Fire Performance of Glass Reinforced Polyesters,1979,3,4,218-222,Parvin
Burning Characteristics of Materials,1979,3,4,223-231,Paul
Fire Testing of Upholstered Furniture and Bedding,1980,4,2,92-97,Paul
Demonstration of the Effect of Softening and Fire Resistance of Materials on Burning Characteristics,1980,4,2,83-86,Paul
Characterization of the Burning Behavior of Polymeric Materials,1984,8,3,137-147,Paul
Fire and Upholstered Furniture: Small Versus Large Scale Tests,1986,10,1,29-39,Paul
Structural fire protection: Report of group session 5.2 CIB W14 commission meeting Copenhagen May 1978,1980,4,1,1-16,Pettersson
Procedure for Assessing the Change in Flame Spread Characteristics of Paints When Subjected to Washing,1978,2,4,177-183,Pettitt
Oxidation and Stabilization of Hydrocarbon Polymers - Relationships New Aspects and Unsolved Problems,1982,6,1,42-50,Pospisil
The Effect of Environmental Temperature Upon the Physical Characteristics of the Smoke Produced by Burning Wood and PVC Samples,1979,3,1,15-22,Zinn
A Closer Look at Cause and Effect in Fire Fatalities: the Role of Toxic Fumes,1981,5,1,41-46,Punderson
The Incapacitative Effects of Exposure to the Thermal Decomposition Products of Polyurethane Foams,1984,8,1,10-16,Purser
A Simplified Theory for Generalizing Results from A Radiant Panel Rate of Flame Spread Apparatus,1981,5,2,52-60,Quintiere
Some Factors Influencing Fire Spread Over Room Linings and in the Astm E-84 Tunnel Test,1985,9,2,65-74,Quintiere
Visualization of Room Fire-Induced Smoke Movement and Flow in a Corridor,1978,2,1,18-24,Quintiere
Smoke Measurements: An Assessment of Correlations Between Laboratory and Full-Scale Experiments,1982,6,3-4,145-160,Quintiere
An Analysis of Smoldering Fires in Closed Compartments and Their Hazard Due to Carbon Monoxide,1982,6,3-4,99-110,Smith
Australian Fire Statistics,1979,3,4,188-194,Ramsay
Preliminary Results from an Examination of House Survival in the 16 February 1983 Bushfires in Australia,1987,11,1,49-51,Ramsay
Quantification of Smoke Produced at Fires -- Test Methods for Smoke and Methods of Expressing Smoke Evolution,1978,2,3,102-109,Rasbash
A Theory of Fire and Fire Processes,1983,7,2,79-88,Drysdale
Effect of Carbon-Bromine Bond Type on Fire Retardation of Unsaturated Polyester,1978,2,1,34-36,Kramer
Effect of carbon-bromine bond type on limiting oxygen index ii. polymethylmethacrylate and polystyrene,1978,2,2,80-83,Ravey
Towards Regulating Toxicity of Materials in Building,1985,9,3,117-119,Reichwerger
Intumescent Coatings and Their Uses,1980,4,3,154-156,Rhys
Burning Characteristics of Beds and Bedding -- Situation and Developments,1983,7,3,157-162,Rieber
Why It Is Difficult to Measure the Burning Characteristics of Materials and Products,1983,7,4,180-184,Rieber
Hydraulic Fluids: An Approach to High-Pressure Spray Flammability Testing Based on Measurement of Heat Output,1981,5,3,87-92,Roberts
Development of an Improved Radiant Heat Source for Fire Testing,1982,6,2,68-71,Robertson
Modeling of NBS Mattress Tests with the Harvard Mark-V Fire Simulation,1982,6,2,80-95,Rockett
Heat-Transfer Characteristics of Flight Jacket Materials,1980,4,3,144-153,Ross
A New Approach to Testing Materials in the NBS Smoke Chamber,1980,4,2,98-103,Routley
An Investigation of the Variation of Oxygen Index of Materials with Changes in Pressure,1982,6,1,23-26,Routley
Effect of Flame Retardants on Polyolefins,1986,10,1,7-10,Rychly
The Corrosiveness of Fluoride-Containing Fire Gases on Selected Steels,1986,10,1,11-19,Sandmann
Assessment of Draft Iso Radiant Panel Spread of Flame Test,1979,3,3,171-181,Settle
The Temperature of Instantaneous Ignition,1980,4,3,163-163,Settle
Modification of the Oxygen Index Test for Better Evaluation of the Relative Flammability,1981,5,1,39-40,Sevecek
Study of Solid Char Residues After Thermal-Degradation of Polystyrene Pvc and Polyamide II,1987,11,2,89-93,Sevecek
Hazard Assessment Techniques Used in the Chemical-Industry and Their Possible Uses Elsewhere,1984,8,4,199-205,Simmons
Future Fire Research Policies,1984,8,3,160-163,Sjolin
Molybdenum Compounds As Flame Retardants and Smoke Suppressants in Halogenated Polymers,1986,10,2,63-69,Haines
Some Aspects of Fire Safety Design on Railways,1984,8,1,6-9,Smith
The Role of Toxic Fumes,1981,5,4,179-179,Smith
Heat Transmission of Proban-Treated Fabrics Subjected to a Radiant Heat Source,1983,7,3,123-127,Stephenson
Simultaneous Thermal-Analysis of Dielectric Materials,1983,7,4,173-179,Stevens
Skin Damage Due to Heat Transfer by Conduction,1980,4,1,45-49,Stoll
The Thermal-Behavior of Lignins Modified by Chlorophosphazenes,1982,6,1,7-9,Struszczyk
Heat Transmission in Fire Test Furnaces,1986,10,2,47-55,Sultan
Fire Safety of Soft Furnishings - An Overview,1982,6,1,16-22,Sumi
The Toxicity of Fire Effluents: Application of Test Data,1984,8,1,1-5,Sumi
Aspects of Fire Research in Japan,1984,8,3,164-171,Suzuki
Rate of Heat Release by Oxygen Consumption in an Open Test Arrangement,1984,8,4,206-216,Östman
Small-Scale Experiments of Flame Spread in Pre-Flashover Compartment Fires,1985,9,1,36-40,Takeda
The Heat Release Rate in Fires,1980,4,4,185-191,Tewarson
Role of KPC of Room Lining Materials in the Growth of Room Fires,1979,3,2,68-73,Bullen
Testing Products and Materials for Their Contribution to Flashover in Rooms,1981,5,3,103-111,Thomas
Application of Test-Results to Analysis and Control of Fire Growth Hazards,1984,8,2,69-76,Thomas
On the Potential of Fire Spread,1984,8,3,172-173,Thomas
Carbonyl Sulfide in Fire Gases,1979,3,3,154-155,Tsuchiya
Comparative Studies of the Burning Behavior of Textiles from Polyester-Cotton and Pure Cotton,1981,5,1,24-32,Umbach
Pyrolysis-Gas Chromatographic Analyses of Untreated and Flame-Proofed Wools,1978,2,1,25-26,Urbas
An evaluation of heat release criteria in reaction-to-fire tests,1980,4,3,157-162,Vandevelde
Comparison Between Different Reaction to Fire Test Methods on Wall-Lining and Flooring Materials,1981,5,2,77-84,Vandevelde
Smoke Problems in Buildings on Fire: A TNO Research-Project,1980,4,4,192-200,Twilt
Flammability Testing in Europe,1980,4,3,149-153,Walker
The Continuing Problem of Serious Burns Involving the Ignition of Clothing Particularly Nightwear,1979,3,4,195-201,Warne
Tomorrow's Safety Is Today's Research,1984,8,3,157-159,Watters
Factors That Influence the Critical Oxygen Index of Various Solids,1979,3,1,39-48,Wharton
Equations for the Maintenance of Standard Testing Conditions When Using the Hot Flammability Test Apparatus,1980,4,1,59-60,Wharton
Anomalous Behavior in Certain Versions of the Critical Oxygen Index Test,1981,5,1,6-13,Wharton
The Effect of Sample-Size on the Burning Behavior of Thermoplastic Materials in the Critical Oxygen Index Test,1981,5,2,73-76,Wharton
Correlation Between the Critical Oxygen Index Test and Other Fire Tests,1981,5,3,93-102,Wharton
The Performance of Various Testing Columns in Small-Scale Horizontal Burning Studies,1984,8,4,177-182,Wharton
Inorganic Elements in the Tracheas of Fire Fatalities,1982,6,1,32-37,Anderson
Combustion Product Toxicity: Dependence on the Mode of Product Generation,1982,6,3-4,161-162,Clarke
Combustion Product Toxicity: Dependence on the Mode of Product Generation,1983,7,2,96-97,Clarke
Toxicity of teflon. similar results obtained with radiant convective heat-sources or in hot fire gases - reply,1984,8,1,55-56,Clarke
The Creep of Structural Steel in Fire: Analytical Expressions,1983,7,2,73-78,Williamsleir
Effective Thermal Inertia in Relation to Normalized Heat Load,1984,8,2,77-80,Williamsleir
A Second Moment Reliability Analysis of Fire Exposed Wood Joist Floor Assemblies,1979,3,3,126-131,Schaffer
Chemical Aspects of Combustion Toxicology of Fires,1979,3,2,110-120,Woolley
Lightweight Fire Protection of Steel Framed Buildings -- Comments on Russian Experience in Use of Light Weight Fire Protection Coverings for Steel Frame Buildings,1982,6,2,51-53,Yakovlev
Ceiling Heat Transfer During Fire Plume and Fire Impingement,1979,3,3,140-147,Faeth
An investigation of fire plume impingement on a horizontal ceiling i. Plume region,1984,8,1,28-39,You
An investigation of fire-plume impingement on a horizontal ceiling ii. Impingement and ceiling-jet regions,1985,9,1,46-56,You
A Simple Mathematical Model of Flashover in Compartment Fires,1986,10,3-4,145-150,Teodorczyk
Neurotoxic Effects of the Oxidative Thermal Degradation Products from Low-Density Polyethylene,1979,3,2,80-83,Savolainen
Toxicity of Polyurethane-Derived Oxidative Thermal Decomposition Products,1982,6,2,96-97,Savolainen
Development of a Stratified Ceiling Layer in Early Stages of a Closed-Room Fire,1978,2,2,54-62,Zukoski
Two Layer Modeling of Smoke Movement in Building Fires,1980,4,1,17-27,Zukoski
Role of Small-Scale Toxicity Testing in Hazard Control,1988,13,,122-129,Alarie
The Transition from Smoldering to Flaming Combustion,1988,13,,37-44,Drysdale
Is high strength concrete more susceptible to explosive spalling than normal strength concrete in fire?,2002,26,3,127-130,Ali
An instrument for determining the total water content in air when extinguishing fires,1999,23,4,187-192,Andersson
Heat sensing manikin test probe,2000,24,4,195-199,Andersson
Analysis and modelling of the unannounced evacuation of a large retail store,1999,23,6,333-336,Shields
Poly(butylene terephthalate) fire retarded by 14-diisobutylene-2356-tetraxydroxy-14-diphosphine oxide. I: Combustion and thermal decomposition,1999,23,1,1-6,Levchik
Gasification of silicone fluids under external thermal radiation part 1. Gasification rate and global heat of gasification,1998,22,6,221-237,Buch
New data for sandwich panels on the correlation between the SBI test method and the room corner reference scenario,2005,29,1,53-59,Axelsson
On the Rate of Heat Release in the Cone Calorimeter,1987,11,4,205-205,Babrauskas
Comments on 'use of small-scale testing to predict cal 133 performance' by Herman H. Forsten,1998,22,1,44-44,Babrauskas
Comments on 'use of small-scale testing to predict cal 133 performance' by Herman H. Forsten,1998,22,1,43-43,Babrauskas
Fire safety improvements in the combustion toxicity area: Is there a role for LC50 tests?,2000,24,2,113-119,Babrauskas
Mechanisms and modes for ignition of low-voltage PVC-insulated electrotechnical products,2006,30,2,151-174,Babrauskas
Fire retardance in polyamide-6 -- The effects of red phosphorus and radiation-induced cross-links,2001,25,5,179-184,Levchik
The Combustion of Cigarette Paper,1988,12,1,25-33,Hirschler
Examples of fire engineering design for steel members using a standard curve versus a new parametric curve,2004,28,2-4,309-322,Barnett
Influence of external heat flux and coating thickness on the thermal insulation properties of two different intumescent coatings using cone calorimeter and numerical analysis,2003,27,4,151-162,Schriever
The Contribution of Materials to Fire Gas Toxicity: A Critical Review of Methods of Assessment,1988,13,,130-137,Becker
Occupancy classification for performance-based life safety,1999,23,6,281-289,Watts
Reducing Risk,1988,13,,172-178,Bengtson
Thermal properties of lightweight-framed construction components at elevated temperatures,2005,29,3,165-179,Sultan
Fire alarm in a public building: How do people evaluate information and choose an evacuation exit?,1999,23,6,311-315,Frantzich
Flame retardant properties of EVA-nanocomposites and improvements by combination of nanofillers with aluminium trihydrate,2001,25,5,193-197,Beyer
Short communication: Carbon nanotubes as flame retardants for polymers,2002,26,6,291-293,Beyer
Filler blend of carbon nanotubes and organoclays with improved char as a new flame retardant system for polymers and cable applications,2005,29,2,61-69,Beyer
A brief history of the prediction of flame extinction based upon flame temperature,2005,29,6,425-427,Beyler
Self heating properties of styrene-butadiene rubber,2006,30,3,215-221,Beyler
Ignition studies of cerium nitrate treated towels,2006,30,3,223-240,Campbell
Risk assessment of a timber frame building by using CRISP simulation,2001,25,5,185-192,Bjorkman
Translating Research Into Practice Successes and Failures,1988,13,,248-254,Blachere
Characterization of the combustion products in large-scale fire tests: Comparison of three experimental configurations,2001,25,2,71-81,Blomqvist
Isocyanates aminoisocyanates and amines from fires - a screening of common materials found in buildings,2003,27,6,275-294,Blomqvist
ISO Ignitability Test and Proposed Criteria,1987,11,4,195-199,Bluhme
Ignitability test for building materials: Influence of fuel gases and the design of the burner's flame stabilizer on test results,1999,23,5,201-207,Bock
Fire Safety Aspects in Public Transport - Road Rail Air,1988,13,,18-25,Bonold
PA-6 clay nanocomposite hybrid as char forming agent in intumescent formulations,2000,24,4,201-208,Kashiwagi
Heat resistance and flammability of high performance fibres: A review,2002,26,4-5,155-168,Bourbigot
Performance based fire safety regulation under intentional uncertainty,1999,23,6,341-347,Brannigan
Nylons - A Review of the Literature on Products of Combustion and Toxicity,1987,11,2,71-88,Levin
Victims and survivors in fatal residential building fires,1999,23,6,305-310,Brennan
Uncertainty analysis of heat release rate measurement from oxygen consumption calorimetry,2005,29,6,383-394,Brohez
Fire calorimetry relying on the use of the fire propagation apparatus. part II: Burning characteristics of selected chemical substances under fuel rich conditions,2006,30,1,35-50,Marlair
Fire calorimetry relying on the use of the fire propagation apparatus. part I: Early learning from use in Europe,2006,30,2,131-149,Marlair
Human behaviour in fire: The development and maturity of a scholarly study area,1999,23,6,249-253,Bryan
Radiative heat flux measurement uncertainty,2003,27,5,209-222,Ohlemiller
Gasification of silicone fluids under external thermal radiation. part 2. Gasification products - characterization and quantitation,1998,22,6,239-252,Buch
Short communication: New approach to the dynamic properties of an intumescent material,1999,23,1,49-51,Le Bras
An analysis of the burning of polyester and vinylester fibre glass composites,2005,29,4,249-264,Burchill
Investigation of flame retardancy in EVA,2000,24,2,85-90,Camino
Legislation on Fire Safety - Limits and Achievements,1988,13,,209-212,Canovan
Iron-Containing Compounds As Flame Retarding Smoke-Suppressing Additives for PVC,1988,12,3,109-113,Carty
Limiting Oxygen Index Data,1989,14,3,123-123,Carty
Effect of glass fibres and fire retardant on the combustion behaviour of composites glass fibres poly(butylene terephthalate),1998,22,1,7-14,Camino
Effect of insulation on the fire behaviour of steel floor trusses,2005,29,4,181-194,Chang
Response Time of Platinum Resistance Thermometers in Flowing Gases,1989,14,1,31-36,Chohan
A proposed fire safety ranking system for old highrise buildings in the Hong Kong special administrative region,1999,23,1,27-31,Chow
New inspection criteria for flashover in compartmental fires,1999,23,1,13-15,Chow
Numerical simulations on balcony spill plume,1999,23,2,91-99,Chow
Development of heat shrinkable and flame-retardant EVA/CSM blends,2001,25,5,199-202,Chowdhury
Effects of Additives on Fire Properties of Polyethylene,1988,12,1,7-18,Christopher
Value-based fire safety: A new regulatory model for mitigating human error,1999,23,6,291-296,Williamson
Advances in modelling heat transfer through wood framed walls in fire,2001,25,6,241-254,Clancy
Full scale experiments for evaluating theoretical fire wall models,2004,28,6,431-458,Young
The effects of brominated flame retardants on the elements of fire hazard: A re-examination of earlier results,1999,23,3,109-116,Clarke
Height extrapolation of fire resistant non-loadbearing steel framed walls,2002,26,3,111-120,Collier
Shape memory alloys for use in thermally activated clothing protection against flame and heat,1999,23,5,223-226,Congalton
Thermal Bowing and How It Affects the Design of Fire Separating Construction,1988,13,,230-236,Cooke
Stability of lightweight structural sandwich panels exposed to fire,2004,28,2-4,299-308,Cooke
Communication of Research to Users,1988,13,,283-290,Courtney
A comparative analysis of protocols for measuring heat transmission through flame resistant materials: Capturing the effects of thermal shrinkage,2002,26,4-5,207-213,Crown
An Investigation of Inorganic Tin Flame Retardants Which Suppress Smoke and Carbon-Monoxide Emission from Burning Brominated Polyester Resins,1989,14,1,23-29,Reynolds
Possible phosphorus/halogen synergism in flame retardant textile backcoatings,2002,26,4-5,235-242,Horrocks
The fire safety of TV set enclosure materials a survey of European statistics,2000,24,1,53-60,Simonson
A sample holder for determining material properties,2000,24,5,219-226,Khan
Evaluation of common ignition models for use with marine gored composites,2000,24,2,91-100,Dembsey
Polyurethane/clay and polyurethane/POSS nanocomposites as flame retarded coating for polyester and cotton fabrics,2002,26,4-5,149-154,Bourbigot
Dynamics of concurrent flame spread over a thin charring solid in microgravity,1998,22,3,95-101,Di Blasi
Update for combustion properties of wood components,2002,26,6,255-267,Dietenberger
Evaluation of Quarter-Scale Compartment Fire Modeling for Constant and Stepped Heat Inputs,1987,11,4,179-190,Dingyi
Flammability of plastics I. Ignition temperatures - reply,1988,12,3,142-142,Thomson
Interflam 88 -- A Review of the 4th International Fire Conference,1988,12,3,89-94,Drysdale
Expandable graphite: a fire retardant additive for polyurethane coatings,2003,27,3,103-117,Camino
The measurement of smoke production from electrical wires under conditions of current overload,2000,24,6,259-263,Elliot
Reduction of the thermoplastic melt hazard of polyester fabric through the application of a radiation cross-linking technique,1998,22,1,19-23,Elton
The use of modelling in burn injury evaluation beneath clothing layers,1999,23,5,217-221,Elton
Cone calorimeter - An alternative calibration constant calculation,2000,24,4,187-193,Fleischmann
CBUF model II applied to exemplary NZ furniture (NZ-CBUF),2001,25,3,105-115,Fleischmann
Short communication: Use of the mass spectrometer for heat release rate analysis in fire calorimeters,2001,25,5,203-207,Vandevelde
Relationship between heat of combustion lignin content and burning weight loss,1998,22,1,1-6,Kikuchi
The Role of Insurance in Code Writing,1989,14,1,11-18,Favre
Studies of Smoke and Toxic Gases - An Italian Viewpoint,1988,13,,116-121,Flisi
Comments on 'use of small-scale testing to predict cal 133 performance' by Herman H. Forsten - reply,1998,22,1,43-43,Forsten
Charring rates and temperature profiles of wood sections,2003,27,2,91-102,Fontana
Fire behaviour of timber surfaces with perforations,2005,29,3,127-146,Fontana
Numerical determination of 3D temperature fields in steel joints,2004,28,2-4,63-82,Franssen
Modelling human behaviour within the fire risk assessment tool CRISP,1999,23,6,349-355,Fraser-Mitchell
Estimating the flow rate capacity of an overturned rail carriage end exit in the presence of smoke,2000,24,6,291-302,Galea
Application of cone calorimeter for the assessment of class of flame retardants for polypropylene,1998,22,1,15-18,Gallina
Flame Spread Properties of Forest Products - Comparison and Validation of Prescribed Australian and North-American Flame Spread Test Methods,1988,12,2,71-85,Gardner
Functionally graded wood in fire endurance with basic nitrogen compounds and phosphoric acid,1998,22,2,77-83,Ishihara
The functionally graded wood observed from chemical and thermal perspectives,1998,22,4,141-148,Ishihara
The functional gradient of fire resistance laminated board,1998,22,3,89-94,Ishihara
The fire retardance and endurance of functionally graded wood in the case of the heat-compressed treatment method,1998,22,5,199-206,Ishihara
Bending and membrane action in concrete slabs,2004,28,2-4,139-157,Gillie
Characterization of flame-retarded polymer combustion chars by solid-state C-13 and Si-29 NMR and EPR,1998,22,2,61-67,Kashiwagi
Assessing the fire performance of electric cables (FIPEC),2001,25,2,49-60,Grayson
Developing cone calorimeter acceptance criteria for materials used in high speed craft,2000,24,1,29-35,Grenier
One-Dimensional Mathematical Modeling of Enclosure Fire Dynamics,1988,12,2,51-60,Kumar
Modelling the response of sprinklers in compartment fires,2001,25,3,117-121,Gupta
Polystyrenes -- A Review of the Literature on the Products of Thermal Decomposition and Toxicity,1987,11,3,109-130,Levin
Smoke gas analysis by Fourier transform infrared spectroscopy - Summary of the SAFIR project results,2000,24,2,101-112,Metcalfe
Application of a one-dimensional thermal flame spread model on predicting the rate of heat release in the SBI test,2001,25,2,61-70,Kokkala
Fire safety assessment of wooden facades,2002,26,1,7-27,Hakkarainen
Computer Aided Materials Selection: State-of-the art and its value for fire risk,1988,13,,237-240,Hall
Practical Applications of Fire Research to Innovation in Building Design,1988,13,,213-220,Ham
Prediction of heat release in the single burning item test,2002,26,2,87-97,Hansen
Prediction of time to flashover in the ISO 9705 room corner test based on cone calorimeter test results,2002,26,2,77-86,Hovde
Technical basis on structural fire resistance design in building standards law of Japan,2004,28,2-4,323-341,Harada
Time to ignition heat release rate and fire endurance time of wood in cone calorimeter test,2001,25,4,161-167,Harada
A Decision Logic for Trading Between Fire Safety Measures,1989,14,1,1-10,Harmathy
Fire and Life Threat,1988,13,,53-60,Hartzell
Deterministic Properties of Turbulent Flames and Implications for Fire Growth,1988,13,,45-52,Hasemi
Flame retardant cotton,1999,23,3,117-123,Hebeish
The flame retardant mechanism of polyolefins modified with chalk and silicone elastomer,2003,27,2,51-70,Hermansson
Linking the flame-retardant mechanisms of an ethylene-acrylate copolymer chalk and silicone elastomer system with its intumescent behaviour,2005,29,6,407-423,Hermansson
Particles from fires - a screening of common materials found in buildings,2003,27,6,295-314,Blomqvist
Dangers relating to fires in carbon-fibre based composite material,2005,29,4,231-248,Hertzberg
Empirical prediction of smoke production in the ISO room corner fire test by use of ISO cone calorimeter fire test data,1999,23,4,193-199,Hovde
Performance in smoke of wayguidance systems,1999,23,6,375-381,Heskestad
Burning characteristics of selected substances: Production of heat smoke and chemical species,1999,23,4,171-185,Mikkola
Burning characteristics of selected substances: Influence of suppression with water,1999,23,4,149-169,Mikkola
Characteristics of Smoke in Different Thermal Regimes,1988,13,,61-68,Silcock
Investigating materials from fires using a test method for spontaneous ignition,2000,24,1,61-66,Quintiere
Response to MS Lewis's letter on the paper 'comparison of the propensity of cigarettes to ignite upholstered furniture fabrics and cotton ducks (500-fabric study)' by Marcelo M. Hirschler Fire Master. 21 123-141 (1997),1998,22,2,87-87,Hirschler
Repeatability and reproducibility of fire tests for cigarette ignition of upholstered furniture composites,1998,22,1,25-37,Hirschler
Analysis of work on smoke component yields from room-scale fire tests,2005,29,5,303-314,Hirschler
Hydrogen chloride evolution from the heating of poly(vinyl chloride) compounds,2005,29,6,367-382,Hirschler
Fire properties of surrogate refuse-derived fuels,2006,30,2,107-130,Dlugogorski
Flame retardancy performance of various UL94 classified materials exposed to external ignition sources,2004,28,1,25-31,Yang
Occupant evacuation and orientation problems in large halls - An exhibition building case study,1999,23,6,369-373,Horasan
Char formation in flame-retarded wool fibres. part 1. effect of intumescent on thermogravimetric behaviour,2000,24,3,151-157,Horrocks
Enhancing polymer flame retardancy by reaction with phosphorylated polyols. Part 2. cellulose treated with a phosphonium salt urea condensate (proban cc9) flame retardant,2002,26,4-5,173-182,Zhang
Shielding effects of silica-ash layer on the combustion of silicones and their possible applications on the fire retardancy of organic polymers,1998,22,2,69-76,Hshieh
Experimental study on the radiative ignition of silicones,1998,22,5,179-185,Hshieh
Predicting heats of combustion and lower flammability limits of organosilicon compounds,1999,23,2,79-89,Hshieh
Note: Measuring the effective heats of combustion of transformer-insulating fluids using a controlled-atmosphere cone calorimeter,2002,26,1,47-49,Hshieh
Short communication: Autoignition temperature of trichlorosilanes,2002,26,6,289-290,Williams
Predicted heats of combustion of some important organo-silicon intermediates,2003,27,1,41-49,Hshieh
Predicting heats of combustion of polymers using an empirical approach,2003,27,1,9-17,Hshieh
Ignition and combustion of low-density polyimide foam,2003,27,3,119-130,Hshieh
Using heat of combustion data to estimate or assess some threshold flammability properties of materials,2003,27,6,267-273,Hshieh
Mechanical impact tests of some selected polymers in high pressure liquid oxygen environments,2004,28,1,55-59,Hshieh
Burning behaviors of selected chlorosilanes and SiH-containing siloxanes,2004,28,1,1-13,Hshieh
Upper flammability limits of some organosilicon compounds,2004,28,6,459-465,Williams
The Use of the ISO/Tc92 Test for Ignitability Assessment,1988,12,1,1-5,Clark
Comparison of BRE simple design method for composite floor slabs in fire with non-linear FE modelling,2004,28,2-4,127-138,Bailey
Toxicity of the Pyrolysis and Combustion Products of Polyvinyl Chlorides -- A Literature Assessment,1987,11,3,131-142,Levin
Observations on the Cone Calorimeter - Comments,1989,14,2,76-76,Hume
Problems in Retaining Technical and Economic Benefits While Improving Fire Safety,1988,13,,255-260,Hurd
Combustion characteristics of crude oils,2001,25,1,1-7,Takahashi
Modeling of the thermal degradation of structural wood members exposed to fire,2004,28,2-4,199-207,Janssens
Numerical simulation of the mass loss process in pyrolizing char materials,1999,23,2,71-78,Galea
Recent developments and improvements in test methods for propensity towards spontaneous heating,1999,23,5,239-243,Jones
Compression properties of wood as functions of moisture stress and temperature,2004,28,2-4,209-225,Clancy
The Effect of Ammonium Sulfate Decabromobiphenyl Oxide on the Flammability of Polyester Cotton Blend,1988,12,4,163-168,Kandil
Ammoniumphosphate Decabromobiphenyl Oxide Synergistic Effect in Treatment of Polyester Cotton Blend,1989,14,2,59-66,Kandil
Complex char formation in flame-retarded fibre-intumescent combinations - iv. mass loss and thermal barrier properties,2000,24,6,265-275,Horrocks
Complex char formation in flame-retarded fibre-intumescent combinations. part v. exploring different fibre/intumescent combinations,2001,25,4,153-160,Horrocks
Analytical method for the behaviour of a reinforced concrete flexural member at elevated temperatures,2004,28,2-4,227-235,Kang
Flammability of plastics I. Ignition temperatures,1988,12,3,141-142,Kashiwagi
Flame retardant mechanism of silica gel/silica,2000,24,6,277-289,Harris
Structural Fire Protection in Japan,1988,13,,179-186,Sato
Means of Escape - 1988 - How Close Are We to Modeling Egress from Buildings in Fire,1988,13,,156-163,Kendik
Calculation of Critical Fire Load from Cables Close to an Unprotected Steel Column,1988,13,,187-193,Keskirahkonen
Breaking of Window Glass Close to Fire,1988,12,2,61-69,Keskirahkonen
Theoretical estimation of critical fire load close to an unprotected steel member,1988,12,4,153-158,Keskirahkonen
Microkinetics of high-temperature pyrolysis,1998,22,2,47-54,Khalturinskii
Comparison of flammability measurements in vertical and horizontal exhaust duct in the ASTM E-2058 fire propagation apparatus,2003,27,6,253-266,Khan
Screening of plenum cables using a small-scale fire test protocol,2006,30,1,65-76,Khan
Effect of contamination of cotton fabric with linseed oil on the activation energies of pyrolysis and oxidation of the fabric,1999,23,3,131-137,Kandil
New polyester resins with reduced flammability and smoke evolution capacity,1998,22,6,253-255,Kicko-Walczak
Investigation of air gaps entrapped in protective clothing systems,2002,26,3,121-126,Li
The Taunton Sleeping-Car Fire and Its Effect on Design,1988,13,,71-75,King
The Effect of Fire-Retardant Additives on the Time-Resolved Processes of Polymer Combustion,1989,14,2,39-41,Kishore
One-sided flame spread phenomena of a thermally thin composite cotton/fiberglass fabric,2005,29,1,27-37,Kleinhenz
Burning characteristics of building products in the light of European harmonization,2000,24,6,253-258,Klingsch
Bradford City Football Stadium Fire,1988,13,,84-89,Kneale
Performance of wood stud shear walls exposed to fire,2000,24,1,9-16,Sultan
Structural fire design according to Eurocode 5 - design rules and their background,2005,29,3,147-163,Konig
Effective thermal actions and thermal properties of timber members in natural fires,2006,30,1,51-63,Konig
Flammability studies of thermally resistant polymers using cone calorimetry,2000,24,5,209-218,Grand
Emergence of aged populace: Who is at higher risk in fires?,1999,23,6,337-340,Kose
Flexible fire barriers based on natural nonwoven textiles,2002,26,4-5,243-246,Kozlowski
Effects of restraint and animal interaction on carbon monoxide lethality: Stress and the role of corticosterone,2000,24,2,77-83,Smith
Evaluation of heat release rate equations used in standard test methods,1998,22,4,167-173,Lattimer
Modelling the charring behaviour of structural lumber,1999,23,5,209-216,Lau
Fire Casualty Experience,1988,13,,109-115,Bull
Investigation and correlation of manikin and bench-scale fire testing of clothing systems,2002,26,6,269-278,Lee
Development of a controlled-atmosphere cone calorimeter,2000,24,3,143-150,Dowling
Fire Detection: The Opportunities Offered by New Generation Fire Detection and Alarm Systems,1988,13,,148-155,Letts
Some comments on the modes of action of nanocomposites in the flame retardancy of polymers,2003,27,1,1-7,Lewin
To Endanger the Life of Another,1988,13,,76-83,Lewis
Comment on 'comparison of the propensity of cigarettes to ignite upholstered furniture fabrics and cotton ducks (500-fabric study)' by M. M. Hirschler Fire Mater 21 123-41 (1997),1998,22,2,85-86,Lewis
Advanced analysis of 3D steel framework exposed to compartment fire,2004,28,2-4,253-267,Liew
Smoke Control - Problems and Solutions,1988,13,,164-171,Hall
Restraint of fire-exposed concrete floor systems,2004,28,2-4,95-125,Buchanan
Modelling the thermal decompositions of wood and leaves under a nitrogen atmosphere,1998,22,3,103-108,Fan
The kinetic methods for which no assumption about the order of reaction is needed,1998,22,5,219-220,Fan
Heat release kinetics,2000,24,4,179-186,Lyon
Fire-resistant elastomers,2003,27,4,195-208,Lyon
Combustibility of cyanate ester resins,2006,30,2,89-106,Lyon
An engineering model for the estimation of occupant premovement and or response times and the probability of their occurrence,1999,23,6,255-263,Regan
University Training of Senior Fire Brigade Officers - the New Approach in Sweden,1988,13,,269-273,Magnusson
Practical Application of Safety Concepts,1988,13,,241-247,Malhotra
Real fire performance of partition assemblies,2005,29,6,351-366,Gann
On the ignition of fuel beds by firebrands,2006,30,1,77-87,Cleary
The Influence of Flame Retardants on the Degradation and Burning of Synthetic-Polymers,1988,13,,29-36,Masarik
Pyrolysis and limiting oxygen indices of cotton fabrics graft copolymerized with oligomeric vinyl phosphonate and/or N-methylolacrylamide,2002,26,4-5,225-234,Sakamoto
Effect of Environmental Conditions on Smoke Propagation,1988,12,1,19-24,Mcilhagger
Smoke Generation from Polypropylene in Different Thermal Environments,1989,14,1,19-22,Mcilhagger
Integrating human factors issues into engineered fire safety design,1999,23,6,273-279,Meacham
Influence of delay times and response times on heat release measurements,2000,24,2,121-130,Van Hees
On the Thermal Ignition of Combustible Materials,1989,14,3,87-96,Wichman
Numerical simulations on balcony spill plume,1999,23,5,245-245,Miles
Hot-Surface Ignition Temperatures of Dust Layers,1988,12,3,115-126,Lazzara
Comments on 'use of small-scale testing to predict cal 133 performance' by Herman H. Forsten,1998,22,1,44-44,Mitusch
Effects of the structural properties of solid fuels on their re-ignition characteristics,1998,22,4,155-165,Dlugogorski
A methodology for evaluating the effect of drying on the heat of combustion of wood-based materials,2000,24,3,165-166,Moghtaderi
Short communication: Effects of char oxidation on re-ignition characteristics of wood-based materials,2000,24,6,303-304,Moghtaderi
Short communication: Application of a surrogate material in assessing the impact of porosity on reignition of wood-based materials,2002,26,2,99-101,Kennedy
The state-of-the-art in pyrolysis modelling of lignocellulosic solid fuels,2006,30,1,1-34,Moghtaderi
Flammability of polystyrene layered silicate (clay) nanocomposites: Carbonaceous char formation,2002,26,6,247-253,Harris
A flammability performance comparison between synthetic and natural clays in polystyrene nanocomposites,2005,29,4,213-229,Morgan
Evolution of Toxic Gases from Burning Polymeric Materials in a Small-Scale Box Model,1988,12,2,43-49,Morikawa
Comment on dr Marcelo m. Hirschler's recent paper entitled 'comparison of the propensity of cigarettes to ignite upholstered furniture fabrics and cotton ducks (500-fabric study) ' in Fire and Materials 21 123-141 (1997),1998,22,3,131-131,Morton
Modelling of the Cardington LBTF steel frame building fire tests,2004,28,2-4,177-198,Clifton
Effect of support conditions on the fire behaviour of steel and composite beams,2004,28,2-4,159-175,Welsh
Mechanical properties of fire-damaged glass-reinforced phenolic composites,2000,24,2,67-75,Mathys
Flammability of oil-based painted gypsum wallboard subjected to fire heat fluxes,2004,28,5,355-385,Mowrer
Design and testing of a new smoke concentration meter,2000,24,5,231-243,Mulholland
Specific extinction coefficient of flame generated smoke,2000,24,5,227-230,Mulholland
The Role and Application of Standard Tests,1988,13,,141-147,Murrell
A numerical model for the behaviour of masonry under elevated temperatures,2003,27,4,163-182,Nadjai
A Small-Scale Flame Test for Fire-Resistance Evaluation of Rubber Conveyor Belts with Fabric Skeletons,1989,14,2,67-72,Nakagawa
Problems in a Drum Friction Test for Fire-Resistance Evaluation of Rubber Conveyor Belts with Fabric Skeletons,1989,14,3,81-86,Takahashi
Prediction Model of CO CO2 and O2 Concentrations in Compartment Fires Using Wood Fuel,1987,11,4,173-178,Nakaya
Thermal studies on paper treated with flame-retardant,1999,23,3,125-129,Khattab
Postfiring stress-strain hysteresis of concrete subjected to various heating and cooling regimes,2002,26,3,103-109,Nassif
Use of cone calorimetry to quantify the burning hazard of apparel fabrics,2002,26,4-5,191-199,Horrocks
Experimental study of the charring rate of tropical hardwoods,2004,28,1,15-24,Franssen
Comments on 'comparison of the propensity of cigarettes to ignite upholstered furniture fabrics and cotton ducks (500-fabric study)' by Marcelo M. Hirschler,1998,22,3,129-130,Norman
PIPD a new high-modulus and high-strength polymer fibre with exceptional fire protection properties,2002,26,4-5,169-172,Northolt
Short communication: Mathematical expression of heat release rate curve and proposal of 'burning index',1998,22,1,39-42,Numajiri
Oxygen Consumption Measurements in the Cone Calorimeter: A Direct Comparison Between a Paramagnetic Cell and a High Temperature Cell,1987,11,4,201-203,Nussbaum
Flame retardancy of nanocomposites,2004,28,6,423-429,Okoshi
Near-surface vapour bubble layers in buoyant low stretch burning of polymethylmethacrylate,1999,23,5,227-237,Olson
Surface temperature of decomposing construction materials studied by laser-induced phosphorescence,2005,29,1,39-51,Alden
Durability of fire retardant treated wood products at humid and exterior conditions review of literature,2001,25,3,95-104,Voss
Mechanical properties of structural steel at elevated temperatures and after cooling down,2004,28,2-4,237-251,Outinen
An aircraft accident database of human experience in evacuation derived from aviation accident reports,1999,23,6,363-368,Galea
A Literature-Review of the Chemical Nature and Toxicity of the Decomposition Products of Polyethylenes,1987,11,2,55-70,Levin
Estimation of flash-point,1988,12,3,127-131,Patil
Correlation of Flashpoint with Molecular Connectivity,1988,12,4,159-162,Patil
Feasibility Study to Demonstrate the Potential of Smoke Hoods in Simulated Aircraft Fire Atmospheres,1988,13,,90-97,Paul
A Feasibility Study to Demonstrate the Potential of Smoke Hoods in Simulated Aircraft Fire Atmospheres - Development of the Fire Model,1989,14,2,43-58,Paul
A personal perspective on research consulting and codes/standards development in fire-related human behaviour 1969-1999 with an emphasis on space and time factors,1999,23,6,265-272,Pauls
Evaluation of passenger train car materials in the cone calorimeter,1999,23,2,53-62,Peacock
Acceptability and Approval of Fire Safety Measures - A Fire-Prevention Officers View,1988,13,,199-204,Peberday
A System Approach to Fire Safety: Do We Have the Tools Yet?,1988,13,,13-17,Pedersen
Nanocomposite fire retardants - A review,2000,24,1,45-52,Porter
An investigation into the mechanism of flame retardancy and smoke suppression by melamine in flexible polyurethane foam,2002,26,4-5,201-206,Liu
Occupant response during a residential highrise fire,1999,23,6,317-323,Proulx
A theory for flame extinction based on flame temperature,2004,28,5,387-402,Quintiere
A theoretical basis for flammability properties,2006,30,3,175-214,Quintiere
Short communication: Comparison of the propensity of cigarettes to ignite upholstered furniture fabrics and cotton ducks (500-fabric study) -- a second opinion,1998,22,4,175-178,Rhyne
Fire Resistant Coatings for Roof Ceiling Deck Timbers,1987,11,4,191-194,Richardson
Sound transmission class and fire-resistance ratings for wood-frame floors,2000,24,1,17-27,Richardson
Fire resistance of timber decking for heavy timber construction,2001,25,1,21-29,Richardson
What fire statistics tell us about our fire and building codes for housing and small buildings and fire risk for occupants of those structures,2001,25,6,255-271,Richardson
Thoughts and observations on fire-endurance tests of wood-frame assemblies protected by gypsum board,2001,25,6,223-239,Richardson
An update to what's burning in home fires,2001,25,2,43-48,Rohr
Comparison of flame spread of textiles and burn injury prediction with a manikin,2005,29,6,395-406,Stampfli
Certification Procedures,1988,13,,205-208,Roux
Post-fire analysis of construction materials - Gypsum wallboard,2000,24,4,167-177,Williamson
Occupants' behaviour in response to the high-rise apartments fire in Hiroshima City,1999,23,6,297-303,Kubota
Critical considerations on the use of a bi-directional probe in heat release measurements,2005,29,5,335-349,Sette
Indian View of Translating Research Into Practice,1988,13,,261-268,Sharma
A comparison of fire retarded and non-fire retarded wood-based wall linings exposed to fire in an enclosure,1999,23,1,17-25,Zhang
Towards the characterization of large retail stores,1999,23,6,325-331,Silcock
Human behaviour in fire,1999,23,6,247-247,Shields
Performance of a single glazing assembly exposed to enclosure corner fires of increasing severity,2001,25,4,123-152,Flood
Performance of a single glazing assembly exposed to a fire in the centre of an enclosure,2002,26,2,51-75,Silcock
Assessment of fire protection performance of water mist applied in exhaust ducts for semiconductor fabrication process,2005,29,5,295-302,Chen
Combustion behaviour of ethylene vinyl acetate copolymer-based intumescent formulations using oxygen consumption calorimetry,1998,22,3,119-128,Le Bras
Relating char depth to fire severity conditions,2001,25,1,9-11,Silcock
The flame-retarding properties of ion-exchanging groups introduced into beech sawdust,1998,22,4,149-154,Simkovic
Estimation of the Magnitude and Spatial Distribution of Combustible Materials in Urban Areas -- A Case Study of the San Jose Area California,1988,12,3,95-108,Gopal
A life-cycle assessment (LCA) model for cables based on the fire-LCA model,2003,27,2,71-89,Andersson
The Value of Effective Communication - Introduction,1988,13,,277-282,Sjolin
The Material Characteristics in the Analysis of Heated Steel Beams,1989,14,3,107-116,Skowronski
Summary of the National Bureau of Standards analysis of the Dupont Plaza Hotel fire,1988,13,,98-105,Nelson
Fire Safety Review: Fire Research Perspective on the Programs of the Center for Fire Research National Bureau of Standards USA,1988,13,,5-12,Snell
Screening tests for fire safety of composites for marine applications,2001,25,6,215-222,Long
Ignition performance of new and used motor vehicle upholstery fabrics,2005,29,5,265-282,Torero
Experimental and analytical studies of steel joint components at elevated temperatures,2004,28,2-4,83-94,Burgess
A theory for quasi-steady single-step thermal degradation of polymers,1998,22,3,109-118,Staggs
Modelling the combustion of solid-phase fuels in cone calorimeter experiments,1999,23,2,63-69,Whiteley
Short communication: Approximate solutions for the pyrolysis of char forming and filled polymers under thermally thick conditions,2000,24,6,305-308,Staggs
Developments in Inorganic Phosphorus Flame Retardants,1988,13,,223-229,Stephenson
The Integration of the Objectives of Fire Safety Into the Process of Architectural Design,1989,14,3,117-122,Stollard
Improving fire retardancy of fast growing wood by coating with fire retardant and surface densification,1998,22,5,207-212,Ishihara
Fire spread via wall/floor joints in multi-family dwellings,2000,24,1,1-8,Sultan
The effects of subfloor and insulation type and thickness on the fire resistance of small-scale floor assemblies,2000,24,3,131-141,Sultan
An evaluation of actual and simulated smoke properties,2005,29,2,91-107,Gritzo
WALL2D: a model for predicting heat transfer through wood-stud walls exposed to fire,1998,22,4,133-140,Takeda
A model to predict fire resistance of non-load bearing wood-stud walls,2003,27,1,19-39,Takeda
Measurements of the effects of smoke on active circuits,1999,23,3,103-108,Tanaka
Environmental issues related to end-of-life options of plastics containing brominated flame retardants,2004,28,5,403-410,Tange
Correlations Between Four Radiant Panel Tests Used to Classify the Fire Behavior of Floor Coverings in the EC,1988,12,3,133-139,Martin
Product stewardship in the flame retardant industry,2004,28,6,417-421,Terhaar
Flammability evaluation of clean room polymeric materials for the semiconductor industry,2001,25,1,31-42,Khan
Characterization of the fire environments in central offices of the telecommunications industry,2003,27,3,131-149,Tewarson
Extension and evaluation of the integral model for transient pyrolysis of charring materials,2005,29,4,195-212,Vandevelde
Thermal properties of gypsum plasterboard at high temperatures,2002,26,1,37-45,Thomas
Fire resistance of structural components protecting escape routes,2004,28,2-4,343-354,Thomas
Decision Logic for Trading Between Fire Safety Measures - Comments,1989,14,2,76-76,Thomas
Flammability of plastics I. Ignition temperatures,1987,11,4,163-172,Drysdale
Observations on the Cone Calorimeter - Comments - Reply,1989,14,2,76-76,Toal
Observations on the Cone Calorimeter,1989,14,2,73-76,Shields
An Examination of Piloted Ignition Characteristics of Cellulosic Materials Using the ISO Ignitability Test,1989,14,3,97-106,Silcock
Desiccant Impurity Effects During Fire Gas Analysis,1988,12,4,173-173,Tran
Rates of Heat and Smoke Release of Wood in An Ohio State University Calorimeter,1988,12,4,143-151,Tran
Burn-through resistance of fibre/felt materials for aircraft fuselage insulation blankets,2002,26,1,1-6,Tran
The Influence of Pressure on Combustible and Toxic Properties of Materials,1987,11,3,159-162,Trzeszczynski
Flame height correlation and upward flame spread modelling,2002,26,6,279-287,Drysdale
Charring of protected wood studs,1998,22,2,55-60,Tsantaridis
Short communication: Fire protection of wood by different gypsum plasterboards,1999,23,1,45-48,Tsantaridis
BDMC interlaboratory cone calorimeter test programme,2002,26,1,29-35,Urbas
Surface temperature measurements on burning materials using an infrared pyrometer: accounting for emissivity and reflection of external radiation,2004,28,1,33-53,Urbas
Effects of retainer frame irradiance level and specimen thickness on cone calorimeter test results,2005,29,1,1-13,Urbas
Key events in the structural response of a composite steel frame structure in fire,2004,28,2-4,281-297,Lamont
Mathematical modelling of fire development in cable installations,2001,25,4,169-178,Grayson
Compressive strength of lumber at high temperatures,2005,29,2,71-90,Mehaffey
Investigations of conveyor belts flammability. comparison of flammability assessment using the large-scale gallery test and cone calorimeter,1998,22,5,213-218,Wachowicz
Investigations of the phenomenon of spontaneous heating of chloroprene cover wear-off in fire-resistant conveyor belts,1999,23,1,7-12,Wachowicz
Designing information technology products with flame retarded plastics with special emphasis on current flammability safety and environmental concerns,2005,29,3,121-126,Wadehra
Evaluation of the flammability of cotton bales,2002,26,4-5,183-189,Wakelyn
Do open flame ignition resistance treatments for cellulosic and cellulosic blend fabrics also reduce cigarette ignitions?,2005,29,1,15-26,Wakelyn
Heats of combustion of high temperature polymers,2000,24,5,245-252,Lyon
Molar group contributions to the heat of combustion,2002,26,3,131-145,Walters
Fire-resistant cyanate ester-epoxy blends,2003,27,4,183-194,Lyon
Cone calorimetric and thermogravimetric analysis evaluation of halogen-containing polymer nanocomposites,2005,29,5,283-294,Wilkie
Evacuation of a theatre: Exercise vs calculations,1999,23,6,357-361,Weckman
Toxic gaseous products of thermal decomposition and combustion of natural and synthetic fabrics with and without flame retardant,2002,26,4-5,215-224,Kozlowski
Comparison of test protocols for the standard room/corner test,1999,23,3,139-146,Janssens
Heat transfer by radiation and convection in fire testing,2004,28,5,411-415,Wickstrom
Conflict Between Fire and Security Measures,1988,13,,194-196,Wilton
The thermal characteristics of different intumescent coatings,1999,23,1,33-43,Kozlowski
Combination of a hydroxy-functional organophosphorus oligomer and a multifunctional carboxylic acid as a flame retardant finishing system for cotton: part ii. formation of calcium salt during laundering,2003,27,5,239-251,Yang
Combination of a hydroxy-functional organophosphorus oligomer and a multifunctional carboxylic acid as a flame retardant finishing system for cotton: part i. the chemical reactions,2003,27,5,223-237,Yang
The combination of a hydroxy-functional organophosphorus oligomer and melamine-formaldehyde as a flame retarding finishing system for cotton,2005,29,2,109-120,Xu
Experimental study of fire compartment with door opening and roof opening,2005,29,5,315-334,Buchanan
Studies on thermal responses of sprinkler heads in atrium buildings with fire field models,2001,25,1,13-19,Chow
Compression mechanical properties of wood at temperatures simulating fire conditions,2001,25,3,83-93,Young
Structural behaviour of an open car park under real fire scenarios,2004,28,2-4,269-280,Kruppa
Comparison of four combustion models for simulating the premixed combustion in inert porous media,1998,22,5,187-197,Zhou
A multidimensional model for simulating vegetation fire spread using a porous media sub-model,2000,24,1,37-43,Zhou
Oxygen Index and Minimum Limiting Rates of Polymer Combustion,1988,12,4,169-172,Gibov
Technical note: The fire performance of electrical insulating materials used in fluorescent lighting fixtures,2001,25,5,209-213,Zicherman
Flame retardancy of some ethylene-vinyl acetate copolymer-based formulations,2000,24,3,159-164,Price
A review of the methodologies used in evacuation modelling,1999,23,6,383-388,Galea
Fire Behaviour of Plastic Parts in Electrical Appliances: Standards Versus Required Fire Safety Objectives,2007,31,1,83-96,Babrauskas
A Slug Calorimeter for Evaluating the Thermal Performance of Fire Resistive Materials,2006,30,4,257-270,Kim
Towards a Methodology for the Characterization of Fire Resistive Materials With Respect to Thermal Performance Models,2006,30,4,311-321,Yang
Manikin Test for Flame Engulfment Evaluation of Protective Clothing: Historical Review and Development of a New ISO Standard,2007,31,5,285-295,Rossi
The Effect of Accelerated Ageing of Building Wires,2007,31,5,311-326,Simonson
Flame Retardancy Finish With an Organophosphorus Retardant on Silk Fabrics,2006,30,6,415-424,Guan
The Introduction of Social Adaptation Within Evacuation Modelling,2006,30,4,285-309,Galea
An Evaluation of the Self-Heating Hazards of Cerium(IV) Nitrated Treated Towels Using Differential Scanning Calorimetry and Thermogravimetric Analysis,2007,31,6,359-371,Beyler
Reconstruction of an Arson Hospital Fire,2007,31,4,225-240,Blomqvist
Survey of Small-Scale Flame Spread Test Results of Modern Fabrics,2007,31,6,373-386,Hirschler
Comparison of Cone and OSU Calorimetric Techniques to Assess the Flammability Behaviour of Fabrics Used for Aircraft Interiors,2006,30,4,241-255,Horrocks
Determination of Activation Temperature of Glass Bulb Sprinklers Using a Thermal Liquid Bath,2006,30,4,271-283,Khan
Remote Extinguishing of Large Fires With Powder Aerosols,2006,30,5,371-382,Krasnyansky
Fire losses in selected property classifications of non-residential commercial and residential wood buildings. part 1: hotels/motels and care homes for aged,2007,31,2,97-123,Leslie
Influence of Gypsum Board Type (X or C) on Real Fire Performance of Partition Assemblies,2007,31,7,425-442,Gann
Performance of a Non-Load-Bearing Steel Stud Gypsum Board Wall Assembly: Experiments and Modelling,2007,31,5,297-310,Gann
Postfire Full Stress-Strain Response of Fire-Damaged Concrete,2006,30,5,323-332,Nassif
Spontaneous Ignition in Storage and Production Lines: Investigation on Wood Pellets and Protein Powders,2007,31,8,477-494,Pauner
Development of Fire-Retarded Materials - Interpretation of Cone Calorimeter Data,2007,31,5,327-354,Schartel
Prediction of fire classification for wood based products. a multivariate statistical approach based on the cone calorimeter,2007,31,3,207-223,Steen-Hansen
Incident Heat Flux Measurements in Floor and Wall Furnaces of Different Sizes,2006,30,6,383-396,Sultan
Measuring Chemical Heat Production Rates of Biofuels by Isothermal Calorimetry for Hazardous Evaluation Modelling,2007,31,4,241-255,Wadso
Predicting Toxic Gas Concentrations Resulting From Enclosure Fires Using Local Equivalence Ratio Concept Linked to Fire Field Models,2007,31,1,27-51,Wang
Flame-retardant finishing of cotton fleece fabric: Part i. the use of a hydroxy-functional organophosphorus oligomer and dimethyloldihydroxylethyleneurea,2007,31,1,67-81,Yang
Booming development of biofuels for transport: Is fire safety of concern?,2009,33,1,1-19,Marlair
Detailed analysis of a smouldering fire scenario at the murder scene: experimental and numerical investigations,2014,38,8,806-816,Deubel
Burning down the silos: integrating new perspectives from the social sciences into human behavior in fire research,2017,41,5,389-411,Kuligowski
Analytical and numerical assessments of local overpressure from hydrogen gas explosions in petrochemical plants,2017,41,6,587-597,Yoon
CFD analysis of smoke backlayering dispersion in tunnel fires with longitudinal ventilation,2017,41,6,598-613,Gannouni
Investigations on oxidation and microstructure evolution of pure Cu in simulated air-kerosene combustion atmospheres,2017,41,6,614-624,Liu
Evaluating methods for preventing smoke spread through ventilation systems using fire dynamics simulator,2017,41,6,625-645,Wahlqvist
Multi-scale experimental investigations of the thermal degradation of pine needles,2017,41,6,654-674,Joseph
Consolidation grouting technology for fire prevention in mined-out areas of working face with large inclined angle and its application,2017,41,6,700-715,Yang
Fire safety assessment of Open Wide Gangway underground trains in tunnels using coupled fire and evacuation simulation,2017,41,6,716-737,Jia
Experimental determination of the effective thermal conductivity of Vacuum Insulation Panels at fire temperatures,2017,41,6,738-749,Founti
Test method for characterising the thermal protective performance of fabrics exposed to flammable liquid fires,2017,41,6,750-767,Rossi
Assessing the reaction to fire of cables by a new bench-scale method,2017,41,6,768-778,Schartel
Mass loss and flammability of insulation materials used in sandwich panels during the pre-flashover phase of fire,2017,41,6,779-796,Giunta d'Albani
Quantifying wind-driven firebrand production from roofing assembly combustion,2019,43,1,3-7,Manzello
Understanding structure ignition vulnerabilities using mock-up sections of attached wood fencing assemblies,2019,43,ePub,ePub,Manzello
The influence of emergency signage on building evacuation behavior: an experimental study,2019,43,1,22-33,Song
Burning behavior of cable tray located on a wall with different cable arrangements,2019,43,1,64-73,Chow
Experimental study of tenability during a full-scale motorcoach tire fire,2019,43,2,131-143,Yang
Development of a multi-layered skin simulant for burn injury evaluation of protective fabrics exposed to low radiant heat,2019,43,2,144-152,Rossi
Effect of obstacle density on the travel time of the visually impaired people,2019,43,2,162-168,Zhang
Calculation methods of heat produced by a lithium-ion battery under charging-discharging condition,2019,43,2,219-226,Wang
Experimental studies on characteristics of fire whirl in a vertical shaft,2019,43,3,229-240,Chow
Experimental investigation on smoke spread characteristics and smoke layer height in tunnels,2019,43,3,303-309,Chen
Experimental study on heat release rate measurement in tunnel fires,2019,43,4,381-392,Qin
Generalized analysis of regional fire risk using data visualization of incidents,2019,43,4,413-421,Fan
Study on the smoke back-layering and critical ventilation in the road tunnel fire at high altitude,2019,43,4,422-429,Wang
Fire resistance of cold-formed steel framed shear walls under various fire scenarios,2019,44,3,352-364,Hoehler
Thermal sensor performance and fire characterisation during short duration engulfment tests,2020,44,4,461-478,Kemp
Smart firefighting construction in China: status problems and reflections,2020,44,4,479-486,Su
Critical ventilation velocity under the blockage of different metro train in a long metro tunnel,2020,44,4,497-505,Li
Influence of unwoven roving and woven fabric carbon fiber reinforcements on reaction-to-fire properties of polymer matrix composites,2020,44,4,557-572,Eibl
Emergency egress for the elderly in care home fire situations,2020,44,4,585-606,Gales
An overview and experimental analysis of furniture fire safety regulations in Europe,2020,44,5,624-639,Guillaume
Research of inorganic fire-extinguishing materials on preventing and controlling gas and coal spontaneous combustion in the narrow coal pillar and adjacent goaf,2020,44,5,660-672,Wang
Combustion behavior characterization of major crops through cone calorimeter,2020,44,5,693-703,Hu
Fire hazard of compressed straw as an insulation material for wooden structures,2020,44,5,736-746,Dagenais
Post-collision fires in road vehicles between 2002 and 2015,2020,44,6,767-775,Bjornstig
Evaluation of the room smoke filling time for fire plumes: influence of the room geometry,2020,44,6,793-803,Boulet
Assessing smoke toxicity of burning combustibles by four expressions for fractional effective dose,2020,44,6,804-813,Chow
Preparation thermal properties and permeabilities of aluminum-coated fabrics destined for thermal radiation protective clothing,2020,44,6,844-853,Zhu
Exploring the biomechanics of walking and crowd "flow",2020,44,6,879-893,Boyce
The study of coupling effects of humidity-heat on the protection performance of protective clothing for fire fighting,2020,44,7,923-934,Shi
Study on fire smoke flow characteristics in the ventilation network and linkage control system in coal mines,2020,44,7,989-1003,Wang
Experimental study on the effect of lateral concentrated smoke extraction on smoke stratification in the longitudinal ventilated tunnel,2020,44,7,1004-1012,Chen
Numerical analysis of smoke flow under the effect of longitudinal airflow in a tunnel fire,2020,44,8,1033-1043,Kalech
Reconstruction of the Grenfell Tower fire - Part 4: Contribution to the understanding of fire propagation and behaviour during horizontal fire spread,2020,44,8,1072-1098,Guillaume
Design car fire size based on fire statistics and experimental data,2020,44,8,1099-1107,Brzezińska
Solving the soft furnishings fire problem (without incurring collateral damage),2021,45,1,3-7,Gann
Soft furnishing fires: they're still a problem,2021,45,1,8-16,Ahrens
Estimating the impact of the mattress fire safety Standard 16 CFR Part 1633 on bed fire outcomes,2021,45,1,17-27,Gann
Bedding ignition vertical flame spread and subsequent thermal impact on underlying mattress,2021,45,1,28-36,Gratkowski
The roles of standard cigarettes in assuring the ignition resistance of soft furnishings,2021,45,1,37-55,Gann
Studying smoldering to flaming transition in polyurethane furniture subassemblies: effects of fabrics flame retardants and material type,2021,45,1,56-67,Levchik
Revisiting flexible polyurethane foam flammability in furniture and bedding in the United States,2021,45,1,68-80,Morgan
Experimental investigation into the influence of ignition location on flame spread and heat release rates of polyurethane foam slabs,2021,45,1,81-96,Hees
Combustion behavior of upholstered furniture. Important findings practical use and implications,2021,45,1,97-113,Sundström
Reduced-scale test to assess the effect of fire barriers on the flaming combustion of cored composites: an upholstery-material case study,2021,45,1,114-126,Nazare
Effects of upholstery materials on the burning behavior of real-scale residential upholstered furniture mock-ups,2021,45,1,127-154,Werrel
Influence of modern plastic furniture on the fire development in fires in homes: large-scale fire tests in living rooms,2021,45,1,155-166,Hofmann
Chemical exposure and flammability risks of upholstered furniture,2021,45,1,167-180,Ryan
Fire safe sustainable loose furnishing,2021,45,1,181-190,Storesund
Estimating the impact of the mattress fire safety Standard 16 CFR Part 1633 on bed fire outcomes,2021,45,1,,Gann
Experimental study of time-averaged upward fire propagation speed of expanded polystyrene external thermal insulation composite systems masonery façade,2021,45,2,193-204,Wang
Experimental study and analysis of radiation heat fluxes received by a floor beneath an inclined ceiling,2021,45,2,205-214,Chen
Mechanical and fire characterization of composite material made of polyethylene matrix and dry chemical powder obtained from end-of-life extinguishers,2021,45,2,215-224,Ortega
Experimental study on the burning behavior of cardboard box fire under low air pressure,2021,45,2,273-282,Zhang
Effect of passive protection on fire propagation of electrical cables,2021,45,3,345-354,Wang
Measuring human perceptions of developing room fires: the influence of situational and dispositional factors,2021,45,4,451-461,Bonny
Pursuing behavioral realism in virtual reality for fire evacuation research,2021,45,4,462-472,Nilsson
Spatiotemporal mapping of evacuee response,2021,45,4,473-487,Brown
The impact of carrying load on physical performance during ascending evacuation movement,2021,45,4,488-497,Kuklane
Walking speed reduction rates at intersections while wayfinding indoors: an experimental study,2021,45,4,498-507,Choi
Method for collecting data of children descending movement on stairs in schools,2021,45,4,508-528,Ono
The influence of individual impairments in crowd dynamics,2021,45,4,529-542,Boltes
Burning biases: mitigating cognitive biases in fire engineering,2021,45,4,543-552,Kinateder
The older adult: associated fire risks and current challenges for the development of future fire safety intervention strategies,2021,45,4,553-563,Boyce
Hospital Evacuation Planning Tool for Assistance Devices (HEPTAD),2021,45,4,564-582,Lawrence
Façade requirements in the 2021 edition of the US International Building Code,2021,45,5,586-597,Hirschler
European approach to assess the fire performance of façades,2021,45,5,598-608,Guillaume
A new test method to determine the fire behavior of façades with etic system,2021,45,5,624-637,Messa
Performance of fire breaks installed within EPS-insulated façade systems,2021,45,5,638-647,Anghel
Evaluating the fire risk associated with cladding panels: an overview of fire incidents policies and future perspective in fire standards,2021,45,5,663-689,Yuen
Towards a simplified fire dynamic simulator model to analyse fire spread between multiple informal settlement dwellings based on full-scale experiments,2021,45,6,720-736,Cicione
A review of the Swedish fire safety regulation: from the industry's perspective,2021,45,6,737-743,Mossberg
A holistic framework for development and assessment of risk-informed performance-based building regulation,2021,45,6,757-771,Meacham
Experimental study on heat transfer of tunnel fire under the influence of longitudinal ventilation and water mist system,2021,45,6,772-778,Zhang
Incorporation of technical human and organizational risks in a dynamic probabilistic fire risk model for high-rise residential buildings,2021,45,6,779-810,Moinuddin
Application of a judgement method to regulatory impact assessments for sprinkler protection to English high-rise residential buildings,2021,45,6,811-822,Spearpoint
Fire resistance of wood stud wall assemblies,2021,45,7,901-917,Sultan
A Round Robin of fire modelling for performance-based design,2021,45,8,985-998,Johansson
Africa: taking fire safety forwards,2021,45,8,999-1007,Messerschmidt
Fire safety of alcoholic beverages in retail stores,2021,45,8,1044-1050,Vaari
Performance analysis of a self-protection system for vehicles in case of WUI fire entrapment,2021,45,8,1051-1062,Pastor
Smoke development and movement during ventilation-limited fires in a multi-storey house,2021,45,8,1063-1074,Senez
Temperature assessment of steel members subjected to fire generated by alternative fuel vehicles: Experimental tests,2021,45,8,1096-1105,Tramoni
A model for the pyrolysis of two Nordic structural timbers,2022,46,1,55-68,Hostikka
A review of methods for determining structural fire severity--Part II: Analysis and review,2022,46,1,138-152,Nilsson
A review of methods for determining structural fire severity--Part I: A historical perspective,2022,46,1,153-167,Nilsson
Study the heat dissipation performance of lithium-ion battery liquid cooling system based on flat heat pipe,2022,46,1,168-180,Xu
Performance and failure mechanism of fire barriers in full-scale chair mock-ups,2022,46,1,329-346,Bundy
An efficient fire detection algorithm based on multi-scale convolutional neural network,2022,46,7,981-992,Liu
Experimental evaluation of tri-hydrated aluminium in fire-retardant properties of glass fibre reinforced polymers,2022,46,7,1000-1010,Landesmann
Foamed geopolymers for fire protection: burn-through testing and modeling,2022,46,7,1011-1019,Bourbigot
Quantification of radiative attenuation provided by fire hose nozzles,2022,46,7,1034-1044,Zeinali
A cost-effective building fire smoke spread prediction approach for risk mitigation based on data assimilation using Ensemble Kalman Filter,2022,46,7,1045-1060,Ji
Reconstruction of the Grenfell tower fire--Part 6--Numerical simulation of the Grenfell tower disaster: Contribution to the understanding of the tenability conditions inside the common areas of the tower,2022,46,7,1061-1079,Guillaume
The effect of soaking in increasingly alkaline aqueous solutions on the spontaneous combustion characteristics of bituminous coal,2022,46,6,864-875,Zhao
A survey-based study concerning public comprehension of two-component EXIT/NO-EXIT signage concepts,2022,46,6,876-887,Xie
Fire injury analysis,2022,46,6,888-895,Taylor
Analyzing ignition data for fire modeling purposes,2022,46,6,896-904,Babrauskas
Prediction of UL-94V tests performed on a wide range of polymeric materials using a comprehensive pyrolysis model coupled with an empirical flame heat feedback model,2022,46,6,905-918,Stoliarov
Study on the flame morphological characteristics of dual fire sources in tunnel under longitudinal ventilation,2022,46,6,919-926,Li
Effect of metro train on the critical driving force for preventing smoke back-layering in tunnel fires,2022,46,6,927-942,Liu
Reconstruction of the Grenfell Tower fire--Part 5: Contribution to the understanding of the tenability conditions inside the apartments following the façade fire,2022,46,8,1083-1110,Guillaume
Numerical investigation on the characteristics of lateral smoke extraction in the immersed road tunnel,2022,46,8,1111-1126,Shi
Reconstruction and fire risk assessment of arc-tracking at a plug-outlet connection point,2022,46,8,1127-1134,Okamoto
Thermal and physical characterization of glass fiber phenolic for aircraft interiors,2022,46,8,1135-1148,Luche
Bio-modified pyrotechnic composite materials for firefighting application,2022,46,8,1168-1179,Sharma
Fire test of metal sandwich plates during a window spill fire,2022,46,8,1180-1196,Jiang
A numerical study on smoke back-layering length in V-shaped tunnels under natural ventilation,2022,46,8,1208-1221,Zhang
Upward flame spread and self-induced buoyant blow-off over two-sided thin fabric at different inclination angles,2022,46,5,753-761,Gong
Flame whirling characteristics of fire in a room with vent,2022,46,5,771-779,Chow
Combustion characteristics of PMMA sheets with different equivalent diameters in still air,2022,46,5,780-788,Sun
Study of the influence of low air pressures on fire behavior and burn-through of aircraft cargo liner,2022,46,5,789-796,Zhang
Toward understanding ignition vulnerabilities to firebrand showers using reduced-scale experiments,2022,46,5,809-817,Manzello
Influences of inclined tunnel ceiling on plug-holing phenomenon and mechanical smoke exhaust efficiency in tunnel fires,2022,46,5,818-829,Xu
Developing an artificial intelligent model for predicting combustion and flammability properties,2022,46,5,830-842,Jiang
Influence of carbon nanoparticle geometry on the fire resistance and anti-aging properties of intumescent fire-retardant coatings,2022,46,4,628-638,Zhou
Study on characteristics of methane explosion flame and pressure wave propagation to the non-methane area in a connected chamber,2022,46,4,639-650,Shen
Investigation on the suppression characteristic of deoxidization gel foam on coal spontaneous combustion,2022,46,4,651-665,Xing
A method to improve the determination of ignition probability in buildings based on Bayesian network,2022,46,4,666-676,Hu
Demonstration of an all-in-one solution for fire safe upholstery furniture: a benign backcoating for smoldering and flame-resistant cover fabrics,2022,46,4,677-693,Nazare
Experimental investigation on burning characteristics of diesel pool fires in naturally ventilated compartment,2022,46,4,694-708,Kumar
Effects of high heat flux exposures on tensile strength of firefighters' protective clothing,2022,46,4,719-731,Torvi
Predicting flammability limits through thermal theory and density theory of flame propagation,2022,46,4,732-739,Nassimi
Numerical investigation of skin and subcutaneous tissue thermal injury during elevated heating,2022,46,3,513-528,Oguntala
Comparing the ignition and burning hazards of sugar-cane bagasse and hemp epoxy composites,2022,46,3,529-543,Hidalgo
Ignition temperature of combustible liquids in mixtures of air with nitrous oxide,2022,46,3,544-548,Mitu
The variations of free radical and index gas CO in spontaneous combustion of coal gangue under different oxygen concentrations,2022,46,3,549-559,Yang
Can fire cause the collapse of Plasco Building: a numerical investigation,2022,46,3,560-575,Huang
Smouldering fire and emission characteristics of Eucalyptus litter fuel,2022,46,3,576-586,Huang
Concurrent flame spread over vertically oriented paper sheet: The effect of sample thickness,2022,46,2,349-359,Jiang
Experimental fire testing of large-scale glass fibre-reinforced polymer-reinforced concrete beams with mid-span straight-end bar lap splices,2022,46,2,360-375,Mostafa
Study on the flow characteristics of fire extinguishing agent FK-5-1-12 in the pipeline release process,2022,46,2,376-387,Wang
Comparative analysis of thermal runaway characteristics of lithium-ion battery under oven test and local high temperature,2022,46,2,397-409,Xu
Experimentation on minimum ignition temperature for boron blended fireworks flash powder dust cloud at normal and inert environmental conditions,2022,46,2,410-419,Arumugachamy
Modeling pedestrian group behavior in crowd evacuations,2022,46,2,420-442,Turgut
Modeling of hot water and steam protective performance of fabrics used in Firefighters' clothing,2022,46,2,463-475,Song
Numerical and experimental study of cedar façade fire,2022,46,2,476-486,Yoshioka
Multi-scale simulations of the thermal degradation of thin wooden plates: evaluation of two kinetic mechanisms,2022,46,1,29-54,Morandini
Flame retardant investigations on carbon fibre-reinforced polyurethane resin parts for aircraft applications produced by wet compression moulding,2022,46,1,181-191,Behnisch
The combustion behavior of epoxy-based multifunctional electrolytes,2022,46,1,192-204,Rogaume
Fire performance of non-load-bearing double-stud light steel frame walls: experimental tests numerical simulation and simplified method,2022,46,1,227-250,Alves
Standardization of high-temperature specific heat capacity test parameters of fire-resistant gypsum board,2022,46,1,251-261,Feng
Evaluating the communication within fire and rescue services and the NHS on the fire risk of emollients in accordance of the MHRA safety update,2022,46,1,277-286,Hall
Fire behavior of pressure-sensitive adhesive tapes and bonded materials,2023,ePub,ePub,ePub,Schartel