Citation

Chen SR, Cai CS. J. Bridge Eng. 2007; 12(6): 755-764.

Copyright

(Copyright © 2007, American Society of Civil Engineers, Publisher Scitation)

DOI

10.1061/(ASCE)1084-0702(2007)12:6(755)

PMID

unavailable

Abstract

In the current AASHTO LRFD specifications, the fatigue design considers only one design truck per bridge with 15% dynamic allowance. While this empirical approach may be practical for regular short and medium span bridges, it may not be rational for long-span bridges (e.g., span length >152.4 m or 500 ft) that may carry many heavy trucks simultaneously. Some existent studies suggested that fatigue may not control the design for many small and medium bridges. However, little research on the fatigue performance of long-span bridges subjected to both wind and traffic has been reported and if fatigue could become a dominant issue for such a long-span bridge design is still not clear. Regardless if the current fatigue design specifications are sufficient or not, a real understanding of the traffic effects on bridge performance including fatigue is desirable since the one truck per bridge for fatigue design does not represent the actual traffic condition. As the first step toward the study of fatigue performance of long-span cable-stayed bridges under both busy traffic and wind, the equivalent dynamic wheel load approach is proposed in the current study to simplify the analysis procedure. Based on full interaction analyses of a single-vehicle-bridge-wind system, the dynamic wheel load of the vehicle acting on the bridge can be obtained for a given vehicle type, wind, and driving condition. As a result, the dimension of the coupled equations is independent of the number of vehicles, through which the analyses can be significantly simplified. Such simplification is the key step toward the future fatigue analysis of long-span bridges under a combined action of wind and actual traffic conditions.

Language: en