Citation

Huang Z, Burgess IW, Plank RJ. Fire Safety J. 2001; 36(8): 795-814.

Copyright

(Copyright © 2001, Elsevier Publishing)

DOI

unavailable

PMID

unavailable

Abstract

The computer code VULCAN has been developed for the three-dimensional structural analysis of composite and steel-framed buildings in fire. In this paper, the main features of the program are outlined, with particular emphasis on the most recent development to the layered procedure for modelling of concrete floor slabs. This development has introduced geometric non-linearity into the modelling of slabs, whose layer structure already allowed temperature distributions and change of material properties through the thickness, as well as modelling the effect of the ribs at the bottom of composite decking slabs. The capabilities of the model are firstly tested at ambient temperature for a uniformly loaded ribbed reinforced concrete slab with simply supported edges, and this is followed by a very detailed modelling of the Cardington restrained beam fire test. In both cases the development of membrane action is demonstrated and the structural behaviour is compared with the geometrically linear case. A number of studies are carried out to demonstrate the influence of the major floor slab details on the behaviour of the structure in fire conditions. These studies provide evidence that when exposed steel temperatures are less than 400[deg]C the concrete slab has little influence, other than to play a part in generating thermal curvature to composite beams. For temperatures higher than about 500[deg]C the effect of the slab progressively becomes much greater, and it is very important to model concrete slabs correctly. The influence of membrane action cannot be ignored, particularly when the fire compartment is subject to high restraint because it is surrounded by cool, stiff structure. At very high temperatures the floor slab becomes the main load-bearing element and the floor loads above the fire compartment are carried by the membrane forces developed in the slab, with tension being carried mainly by the steel anti-cracking mesh or reinforcing bars. However, the effect of the very high in-plane restraint to thermal expansion in the particular Cardington test considered is to enhance the peripheral zone of compressive membrane force and to reduce the extent of the central area of tensile force compared with more usual cases.