Citation

Nazaré S, Kandola BK, Horrocks AR. J. Fire Sci. 2008; 26(3): 215-242.

Copyright

(Copyright © 2008, SAGE Publishing)

DOI

10.1177/0734904107087818

PMID

unavailable

Abstract

Smoke is considered to be the main fire hazard but its production depends on major variables, principally the chemical character and the burning rate of the polymer plus the availability of oxygen and hence ventilation. The main aim of this work is to study the effect of smoke suppressants on flammability and smoke production of flame retarded unsaturated polyester resin-nanocomposites using four different testing regimes representing different fire scenarios. Samples containing zinc borate, zinc stannates, ammonium polyphosphate with and without nanoclay are analyzed for smoke generation using cone calorimetry (well-ventilated fire), a tube furnace (fully developed fire), and a smoke density chamber (under-ventilated fire). Carbon monoxide (CO) and carbon dioxide (CO2) measurements using thermogravimetry-evolved gas analysis (TG-EGA), cone calorimetry, and tube furnace have also been analyzed and compared. Results have confirmed that the production of smoke, CO, and CO2 depend upon smoke suppressants and fire conditions used during testing samples.
From this study it is evident that tin additives have very little influence on flammability of unsaturated polyester resin but they reduce smoke formation. The slight flame retardant action of the Res/APP/ZB sample is due to enhanced cross-linking of APP in the presence of zinc borate, whereas zinc stannates do not promote cross-linking of APP and hence show no improvement in flame retardancy. Finally, the presence of nanoclay in flame retarded resin shows significant reduction in smoke formations in both well-ventilated and under-ventilated fire condition. However, in the presence of smoke suppressants used in this study, the nanoclay is not instrumental in further suppressing smoke formation.

Language: en