Citation

Koo JH, Venumbaka S, Cassidy PE, Fitch JW, Grand AF, Bundick J. Fire Mater. 2000; 24(5): 209-218.

Copyright

(Copyright © 2000, John Wiley and Sons)

DOI

unavailable

PMID

unavailable

Abstract

The effectiveness of a set of thermally resistant polymers was evaluated for aircraft applications using the cone calorimeter (ASTM E1354/ISO 5660) under heat fluxes simulating real scale fires. This study included eight developmental and commercial thermally resistant polymers available in the literature and/or marketplace. The polymers included were aromatic polyester, polyetherimide, fluorine-containing polyetherketone, phosphorus and fluorine-containing co-polyetherketone, fluorine and phosphorus-containing polyether, fluorine-containing polyester, poly(dimethylsiloxane)etherimide and polysulfone. The effects of fluorine, phosphorus, silicon and sulfone group in polymers were examined. This evaluation was based on time to ignition, peak, average and total heat release rates obtained at an external heat flux of 50 kW/m(2). Other parameters such as effective heat of combustion, mass loss and rate of smoke and toxic gas evolution were collected during the cone calorimeter test.