Citation

Munoz S, Castillo SM, Torres Y. J. Mech. Behav. Biomed. Mater. 2018; 80: 88-96.

Affiliation

Department of Engineering and Materials Science and Transportation, University of Seville, Av. Camino de los Descubrimientos s/n, 41092 Seville, Spain.

Copyright

(Copyright © 2018, Elsevier Publishing)

DOI

10.1016/j.jmbbm.2018.01.026

PMID

29414480

Abstract

Commercially pure Titanium (cpTi) and its alloys are the most successful metallic biomaterials for bone replacement, due to its excellent biomechanical and biofunctional balance. However, these materials have higher elastic modulus when compared with bone, leading to the stress-shielding phenomenon and promoting bone resorption. Development of porous implants with low elastic modulus, providing a good mechanical and functional balance (suitable mechanical strength and optimum osseointegration), is the focus of emergent research in advanced Ti-based alloy biomaterials. With the aim of understanding the mechanical behaviour of porous materials with relation to the porosity level and the porous morphology, a new improved model with three different versions have been developed in this work. The proposed FE model combines the simplicity of a 2D periodic geometry with the complex information of the pore morphology extracted from experimentation. The methodology to generate the 2D simulated microstructure is based on a series of nxn pores distributed in a square matrix. The different versions of the model differ in the way of building the porous geometry. In the first version of the model ("Basic-Pattern Model"), the pores are supposed to be circular and periodically distributed in the matrix, following a perfect pattern. The second version of the model ("Pattern Model") is similar to the previous one, but with elliptic pores with a morphology randomly generated, following statistical information from experiments. In the third version ("Semi-random Model"), a controlled random distribution of the pores is obtained by including a randomness factors in both directions. By making use of the proposed FE model with its different versions, five different porous titanium obtained by the space-holders technique (with porosities θ = 28%, 37%, 47%, 57% and 66%) have been modeled based on experimental information of the pore morphology, and its macroscopic mechanical behaviour has been simulated, showing relatively good agreement with experimental results.

Copyright © 2018 Elsevier Ltd. All rights reserved.

Language: en

Keywords

Finite element method; Porous titanium; Powder metallurgy; Space-holder technique; Stress shielding