SAFETYLIT WEEKLY UPDATE

We compile citations and summaries of about 400 new articles every week.
RSS Feed

HELP: Tutorials | FAQ
CONTACT US: Contact info

Search Results

Journal Article

Citation

Leclercq L, Paipuri M. Transp. Sci. 2019; 53(6): 1526-1545.

Copyright

(Copyright © 2019, Institute for Operations Research and the Management Sciences)

DOI

10.1287/trsc.2019.0908

PMID

unavailable

Abstract

Aggregated dynamic traffic models based on the network macroscopic fundamental diagram (MFD) have been founded on stationary or steady-state approximations. Theoretically, they are only qualified with slow-varying demand profiles as inputs. In practice, MFD models are often fed with fast-varying demand patterns classically observed during peak hours. This paper investigates the accuracy of existing MFD model outputs in such a case. It also provides a fresh look at hysteresis loops that may arise on MFD shapes and shows how they are connected to the demand profile. First derived are the exact solutions of the Lighthill, Whitham, and Richards (LWR) model for a simple but meaningful test case corresponding to the loading and the recovery of an arterial with a single bottleneck. The spatial integration of these solutions permits to derive the average flow- and outflow-MFD patterns. The average flow-MFD exhibits a clockwise hysteresis loop with higher flows during the network loading than during the recovery. The outflow MFD shows an opposite trend with a counterclockwise hysteresis loop. The detailed analysis of the LWR solution highlights that these patterns are fully driven by the congestion dynamics and different wave propagation during both periods. This complements existing studies that tend to explain hysteresis by heterogeneous network loading due to unbalanced flows at intersections. It should be noted that the size of the production-MFD hysteresis loop is influenced by the demand loading profile, which means that the MFD is more sensitive to the demand than initially expected. The second part of the paper is about the implications of these observations on the MFD simulation. The main conclusion is that the accumulation-based formulation captures properly the aggregate dynamics of the LWR model during saturation but not in free-flow. It should be calibrated with an average flow-MFD that does not account for the hysteresis pattern to properly estimate the outflow. On the contrary, the original formulation of the trip-based model is only valid in free-flow. During saturation, it should be patched to modify the outflow values. The best approach is a hybrid model that combines the trip-based model in free-flow and the accumulation-based model during saturation. Note that in free-flow the trip-based model is better fed by the average flow-MFD with hysteresis as it gives better estimation for the mean speed. Finally, some evidences are presented and tend to confirm that all the conclusions remain valid for more complex urban settings.


Language: en

NEW SEARCH


All SafetyLit records are available for automatic download to Zotero & Mendeley
Print