Citation

Nahal M, Khelif R. Int. J. Struct. Integr. 2021; 12(2): 306-321.

Copyright

(Copyright © 2021, Emerald Group Publishing)

DOI

10.1108/IJSI-02-2020-0021

PMID

unavailable

Abstract

PURPOSE: The aim of this paper is to investigate the failure probability in an irregular area in pipeline (elbow) over its lifetime. The reliability analysis is performed by using of an enhanced first-order reliability method / second-order reliability method (FORM/SORM) and Monte Carlo simulation methods: a numerical model of a corroded pipeline elbow was developed by using finite element method; also, an empirical mechanical behavior model has been proposed. A numerical case with high, moderate and low corrosion rates was conducted to calculate the deferent reliability indexes. The found results can be used in an application case for managing an irregular area in pipeline lifetime. Hence, it is necessary to ensure a rigorous inspection for this part of a pipeline to avoid human and environmental disasters.

DESIGN/METHODOLOGY/APPROACH: The present paper deals a methodology for estimating time-dependent reliability of a corroded pipeline elbow. Firstly, a numerical model of corroded elbow is proposed by using the finite element method. A mechanical behavior under the corrosion defect in time is studied, and an empirical model was also developed.

FINDINGS: The result of this paper can be summarized as: a mechanical characterization of the material was carried out experimentally. A numerical model of a corroded pipeline elbow was developed by using the finite element method. An empirical mechanical behavior model has been developed. The reliability of a corroding pipe elbow can be significantly affected by corrosion and residual stress. A proportional relationship has been found between probability of failure and corrosion rate. The yield stress and pressure service have an important sensitivity factor.

ORIGINALITY/VALUE: Aiming to help Algerian gas and oil companies' decision makers, the present paper illustrates a methodology for estimating time-dependent reliability of a corroded pipeline elbow over its lifetime using numerical models by applying the finite element method. Firstly, a numerical model of a corroded pipe elbow was developed and coupled with an empirical mechanical behavior model, which is also proposed. A probabilistic is then developed to provide realistic corrosion parameters and time modeling, leading to the real impact on the lifetime of an elbow zone in pipeline. The reliability indexes and probability of failure for various corrosion rates with and without issued residual stress are computed using Monte Carlo simulation and FORM. © 2020, Emerald Publishing Group

Keywords: Pipeline transportation

Language: en

Keywords

Decision making; Finite element method; Probability; Monte Carlo methods; Pipeline corrosion; Pipelines; Corrosion rate; Numerical methods; Reliability analysis; Numerical models; Failure analysis; Disaster prevention; Yield stress; Gas industry; Petroleum industry; Pipe joints; Residual stresses