Citation

Edalati-nejad A, Ghodrat M, Simeoni A. Fire (Basel) 2021; 4(4): e94.

Copyright

(Copyright © 2021, MDPI: Multidisciplinary Digital Publications Institute)

DOI

10.3390/fire4040094

PMID

unavailable

Abstract

In this study, a time-dependent investigation has been conducted to numerically analyze the impact of wind-driven surface fire on an obstacle located on sloped terrain downstream of the fire source. Inclined field with different upslope terrain angles of 0, 10, 20, and 30° at various wind-velocities have been simulated by FireFoam, which is a large eddy simulation (LES) solver of the OpenFOAM platform. The numerical data have been validated using the aerodynamic measurements of a full-scale building model in the absence of fire effects. The results underlined the physical phenomena contributing to the impact of varying wind flow and terrain slope near the fire bed on a built area. The findings indicated that under a constant heat release rate and upstream wind velocity, increasing the upslope terrain angle leads to an increase in the higher temperature areas on the ground near the building. It is also found that raising the inclined terrain slope angle from 0 to 30°, results in an increase in the integrated temperature on the surface of the building. Furthermore, by raising the terrain slope from 0 to 30°, the integrated temperature on the ground for the mentioned cases increases by 16%, 10%, and 13%, respectively.

Language: en

Keywords

LES; terrain slope; wildfire; wildland–urban interface; wind structure; wind–fire interaction