Citation

Wu Q, Zhang Q, Zhang B. Safety Sci. 2012; 50(4): 865-868.

Copyright

(Copyright © 2012, Elsevier Publishing)

DOI

10.1016/j.ssci.2011.08.017

PMID

unavailable

Abstract

The growth rate of hydrate and morphology of methane hydrate formation were studied in a visual pressure cell at 5.5 MPa. The gas hydrate formation was carried out (coal mine methane (CMM) + tetrahydrofuran (THF) + sodium dodecyl sulphate (SDS) + H2O) with and without SAP. Experimental data on the hydrate growth rate and induction time were obtained for three different CMM samples. The influence of SAP on hydrate growth rate was determined. Results showed that after the addition of SAP, with the methane concentration increased in CMM, the induction time was reduced by 9 min, 10 min and 3 min, and the growth rate was shortened by 0.56 × 10−6/m3 min−1, 0.53 × 10−6/m3 min−1 and 1.42 × 10−6/m3 min−1, respectively. This study could be useful for the recovery of methane from CMM by forming hydrate in the chemical and mining industry.