Citation

Wu X, Lu H, Huang K, Wu S, Qiao W. PLoS One 2015; 10(2): e0115299.

Affiliation

College of Pipeline and Civil Engineering, China Petroleum University, Qingdao, Shandong, China; College of Petroleum Engineering, Liaoning Shihua University, Fushun, Liaoning, China.

Copyright

(Copyright © 2015, Public Library of Science)

DOI

10.1371/journal.pone.0115299

PMID

25692790

Abstract

When a long distance oil pipeline crosses an earthquake disaster area, inertial force and strong ground motion can cause the pipeline stress to exceed the failure limit, resulting in bending and deformation failure. To date, researchers have performed limited safety analyses of oil pipelines in earthquake disaster areas that include stress analysis. Therefore, using the spectrum method and theory of one-dimensional beam units, CAESAR II is used to perform a dynamic earthquake analysis for an oil pipeline in the XX earthquake disaster area. This software is used to determine if the displacement and stress of the pipeline meet the standards when subjected to a strong earthquake. After performing the numerical analysis, the primary seismic action axial, longitudinal and horizontal displacement directions and the critical section of the pipeline can be located. Feasible project enhancement suggestions based on the analysis results are proposed. The designer is able to utilize this stress analysis method to perform an ultimate design for an oil pipeline in earthquake disaster areas; therefore, improving the safe operation of the pipeline.

Keywords: Pipeline transportation

Language: en