Citation

Lovestead TM, Bruno TJ. Forensic Chem. 2017; 5: 79-85.

Copyright

(Copyright © 2017, Elsevier Publishing)

DOI

10.1016/j.forc.2017.06.003

PMID

unavailable

Abstract

The quest for a reliable means to detect cannabis intoxication with a breathalyzer is ongoing. To design such a device, it is important to understand the fundamental thermodynamics of the compounds of interest. The vapor pressures of two important cannabinoids, cannabidiol (CBD) and D9-tetrahydrocannabinol (D9-THC), are presented, as well as the predicted normal boiling temperature (NBT) and the predicted critical constants (these predictions are dependent on the vapor pressure data). The critical constants are typically necessary to develop an equation of state (EOS). EOS-based models can provide estimations of thermophysical properties for compounds to aid in designing processes and devices. An ultra-sensitive, quantitative, trace dynamic headspace analysis sampling called porous layered open tubularcryoadsorption (PLOT-cryo) was used to measure vapor pressures of these compounds. PLOT-cryo affords short experiment durations compared to more traditional techniques for vapor pressure determination (minutes versus days). Additionally, PLOT-cryo has the inherent ability to stabilize labile solutes because collection is done at reduced temperature. The measured vapor pressures are approximately 2 orders of magnitude lower than those measured for n-eicosane, which has a similar molecular mass. Thus, the difference in polarity of these molecules must be impacting the vapor pressure dramatically. The vapor pressure measurements are presented in the form of Clausius-Clapeyron (or van't Hoff) equation plots. The predicted vapor pressures that would be expected at near ambient conditions (25 degrees C) are also presented.

Published by Elsevier B.V.

Language: en