Citation

Ustundağ Y, Huysal K. Biochem. Med. (Zagreb) 2017; 27(3): e030708.

Affiliation

Department of Clinical Biochemistry, Bursa Yuksek Ihtisas Faculty, Saglik Bilimleri University, Bursa, Turkey.

Copyright

(Copyright © 2017, Croatian Society for Medical Biochemistry and Laboratory Medicine)

DOI

10.11613/BM.2017.030708

PMID

29180916

PMCID

PMC5696754

Abstract

INTRODUCTION: The quality of blood ethanol concentration (BEC) determination is important because of its legal ramifications. Measurement uncertainty provides quantitative information about the quality and reliability of test results. In this study, we aim to calculate the measurement uncertainty for the ethanol test in our laboratory measured with a Synchron Systems Ethanol assay kit by employing an enzymatic rate method on the Beckman-Coulter Olympus AU400 auto analyzer (Beckman Coulter Inc, Melville, USA).

MATERIALS AND METHODS: The measurement uncertainty values were calculated in accordance to the Nordtest guidelines. All vehicle drivers involved in a traffic accident were retrospectively inspected for the BEC test conducted during July to December 2016 in our emergency laboratory.

RESULTS: A 1034 vehicle drivers had their BEC tested. The results for 181 drivers were > 0.50 g/L and reported as positive. The serum ethanol concentration in those showing a positive result was 2.04 ± 1.01 g/L, over four times the legal limit. The median BEC in those showing a negative result was 0.03 (IQR: 0.03) g/L. The expanded uncertainty obtained was 19.74%. When measurement uncertainty values were added to the results of the 1034 drivers who were retrospectively screened, eight vehicle drivers had results with 95% confidence intervals that exceeded the legal limit 0.50 g/L.

CONCLUSIONS: The BEC test results for vehicle drivers with values close to legal limits should be reported as the obtained ethanol concentration with corresponding measurement uncertainty.

Language: en

Keywords

blood ethanol; driving accidents; measurement uncertainty