Citation

Li YZ, Ingason H. Fire Safety J. 2018; 97: 96-110.

Copyright

(Copyright © 2018, Elsevier Publishing)

DOI

10.1016/j.firesaf.2017.06.011

PMID

unavailable

Abstract

A series of model scale tunnel fire tests was carried out to investigate effects of the fire suppression system on production of key combustion products including CO and soot. The key parameters accounted for in the tests include fuel type, ventilation velocity and activation time. The results show that fire suppression indeed has influence on production of combustion products especially for cellulose fuels. In case that the fire is not effectively suppressed, e.g. when the water density is too low or activation is too late, the CO concentration and visibility could be worse than in the free-burn test. From the point of view of production of combustion products, only fire suppression systems with sufficient capability and early activation are recommended to be used in tunnels.

Language: en

Keywords

Activation; CO yield; FED; Fire suppression; Soot yield; Tunnel fire; Ventilation; Visibility