Citation

Joodaki H, Bailey A, Lessley DJ, Funk J, Sherwood C, Crandall J. J. Biomech. Eng. 2019; ePub(ePub): ePub.

Affiliation

Center for Applied Biomechanics, Department of Mechanical and Aerospace Engineering, University of Virginia, 4040 Lewis and Clark Drive, Charlottesville, VA 22911, USA.

Copyright

(Copyright © 2019, American Society of Mechanical Engineers)

DOI

10.1115/1.4043038

PMID

30835289

Abstract

Approximately 1.6-3.8 million sports-related traumatic brain injuries occur each year in the US. Researchers track the head motion using a variety of techniques to study the head injury biomechanics. To understand how helmets provide head protection, quantification of the relative motion between the head and the helmet is necessary. The purpose of this study was to compare helmet and head kinematics and quantify the relative motion of helmet with respect to head during experimental representations of on-field American football impact scenarios. Seven helmet-to-helmet impact configurations were simulated by propelling helmeted crash test dummies into each other. Head and helmet kinematics were measured with instrumentation and an optical motion capture system. The analysis of results showed that, the helmets translated 12 - 41 mm and rotated up to 37 degrees with respect to the head. The peak resultant linear acceleration of the helmet was about 2 - 5 times higher than the head. The peak resultant angular velocity of the helmet ranged from 37% less to 71% more than the head, depending on the impact conditions. The results of this study demonstrate that the kinematics of the head and helmet are noticeably different and that the helmet rotates significantly with respect to the head during impacts. Therefore, capturing the helmet kinematics using a video motion tracking methodology is not sufficient to study the biomechanics of the head. Head motion must be measured independently of the helmet.

Keywords: American football

Language: en