Citation

Oeur RA, Gilchrist MD, Hoshizaki TB. Proc. Inst. Mech. Eng. Pt. P J. Sports Eng. Tech. 2019; 233(2): 258-267.

Copyright

(Copyright © 2019, SAGE Publishing)

DOI

10.1177/1754337118819337

PMID

unavailable

Abstract

Collisions with the head are the primary cause of concussion in contact sports. Head impacts can be further characterized by velocity, striking mass, compliance, and location (direction). The purpose of this study was to describe the interaction effects of these parameters on peak strain in four brain regions and the volume of strain for collision impacts. A pendulum test set-up was used to deliver impacts to an adult Hybrid III headform according to four levels of mass (3, 9, 15, and 21 kg), four velocities (1.5, 3.0, 4.5, and 6.0 m/s), two impact locations (through the centre of gravity and a non-centre of gravity), and three levels of compliance simulating unprotected, helmeted, and well-padded conditions in sport. Headform accelerations were input into a brain finite element model to obtain peak strain in the frontal, temporal, parietal, and occipital lobes and the volume of the brain experiencing 0.10, 0.15, 0.20, and 0.25 strains. Centre-of-gravity impacts created the highest strains (peak and volume) under low compliance and non-centre-of-gravity impacts produced greater strain responses under medium and high compliance conditions. The temporal lobe was the region that consistently displayed the highest peak strains, which may be due to the proximity of the impact locations to this region. Interactions between mass and velocity displayed effects where the 9-kg mass had higher peak and volumes of strain than the 15-kg mass at velocities of 3.0 and 4.5 m/s. This study demonstrates the important role of interacting impact parameters on increasing strain responses that are relevant to the spectrum of diffuse brain injuries, including concussion.

Language: en