Citation

Khosroshahi SF, Duckworth H, Galvanetto U, Ghajari M. J. Biomech. 2019; ePub(ePub): 109376.

Affiliation

Dyson School of Design Engineering, Imperial College London, London, UK.

Copyright

(Copyright © 2019, Elsevier Publishing)

DOI

10.1016/j.jbiomech.2019.109376

PMID

31627837

Abstract

This paper evaluates the effects of topology and relative density of helmet lattice liners on mitigating Traumatic Brain Injury (TBI). Finite Element (FE) models of new lattice liners with prismatic and tetrahedral topologies were developed. A typical frontal head impact in motorcycle accidents was simulated, and linear and rotational accelerations of the head were recorded. A high-fidelity FE model of TBI was loaded with the accelerations to predict the brain response during the accident. The results show that prismatic lattices have better performance in preventing TBI than tetrahedral lattices and EPS that is typically used in helmets. Moreover, varying the cell size through the thickness of the liner improves its performance, but this effect was marginal. The relative density also has a significant effect, with lattices with lower relative densities providing better protection. Across different lattices studied here, the prismatic lattice with a relative density of 6% had the best performance and reduced the peak linear and rotational accelerations, Head Injury Criterion (HIC), brain strain and strain rate by 48%, 37%, 49%, 32% and 65% respectively, compared to the EPS liner. These results can be used to guide the design of lattice helmet liners for better mitigation of TBI.

Copyright © 2019 Elsevier Ltd. All rights reserved.

Language: en

Keywords

Additive manufacturing; FEM; Graded lattice; Helmet; PPE; TBI