SAFETYLIT WEEKLY UPDATE

We compile citations and summaries of about 400 new articles every week.
RSS Feed

HELP: Tutorials | FAQ
CONTACT US: Contact info

Search Results

Journal Article

Citation

Sil G, Maji A, Nama S, Maurya AK. Transport 2019; 34(4): 425-436.

Copyright

(Copyright © 2019, Vilnius Gediminas Technical University and Lithuanian Academy of Sciences, Publisher Vilnius Gediminas Technical University (VGTU) Press)

DOI

10.3846/transport.2019.10715

PMID

unavailable

Abstract

Researchers have studied two-lane rural highways to predict the operating speed on horizontal curves and correlated it with safety. However, the driving characteristics of four-lane-divided highways are different. Weak lane discipline is observed in these facilities, which influences vehicle speed in adjacent lane or space. So, irrespective of its lane or lateral position, vehicles in four-lane divided highways are considered free flowing only when it maintains the minimum threshold headway from any lead vehicle. Examination of two conditions is proposed to ensure the free flow. Vehicles meeting both conditions, when tracked from the preceding tangent section till the centre of the horizontal curve, are considered as free flowing. The speed data of such free flowing passenger cars at the centre of eighteen horizontal curves on four-lane divided highways is analysed to develop a linear operating speed prediction model. The developed model depends on curve radius and preceding tangent length. The operating speed of passenger car in four-lane divided highways is influenced by horizontal curve of radius 360 m or less. Further, longer tangent would yield higher operating speed at the centre of the curve. Finally, two nomograms are suggested for conventional design, consistency based design and geometric design consistency evaluation of four-lane divided horizontal curves.

Keyword :
operating speed,
horizontal curve,
speed prediction model,
weak lane discipline,
nomogram,
passenger car,
four-lane divided highway





How to Cite




Sil, G., Maji, A., Nama, S., & Maurya, A. K. (2019). Operating speed prediction model as a tool for consistency based geometric design of four-lane divided highways. Transport, 34(4), 425-436. https://doi.org/10.3846/transport.2019.10715




More Citation Formats





ACM




ACS




APA




ABNT




Chicago




Harvard




IEEE




MLA




Turabian




Vancouver


















Published in Issue Jul 17, 2019





Abstract Views
400






PDF Downloads
261






This work is licensed under a Creative Commons Attribution 4.0 International License.








References




AASHTO. 2011. A Policy on Geometric Design of Highways and Streets. 6th edition. American Association of State Highway and Transportation Officials (AASHTO), Washington, DC, US. 912 p.

Abbas, S. K. S.; Adnan, M. A.; Endut, I. R. 2011. Exploration of 85th percentile operating speed model on horizontal curve: a case study for two-lane rural highways, Procedia - Social and Behavioral Sciences 16: 352-363. https://doi.org/10.1016/j.sbspro.2011.04.456

Abdul-Mawjoud, A. A.; Sofia, G. G. 2008. Development of models for predicting speed on horizontal curves for two-lane rural highways, Arabian Journal for Science and Engineering 33(2): 365-377.

Bangarraju, V. S. H.; Ravishankar, K. V. R.; Mathew, T. V. 2016. Analysis of lateral distance keeping behaviour in mixed traffic conditions with little lane discipline, International Journal for Traffic and Transport Engineering 6(4): 431-443. https://doi.org/10.7708/ijtte.2016.6(4).06

Bennett, C. R. 1994. A Speed Prediction Model for Rural TwoLane Highways: Dissertation. University of Auckland, New Zealand. 456 p.

Bonneson, J. A. 1999. Side friction and speed as controls for horizontal curve design, Journal of Transportation Engineering 125(6): 473-480. https://doi.org/10.1061/(ASCE)0733-947X(1999)125:6(473)

Camacho-Torregrosa, F. J.; Pérez-Zuriaga, A. M.; Campoy-Ungría, J. M.; García-García, A. 2013. New geometric design consistency model based on operating speed profiles for road safety evaluation, Accident Analysis & Prevention 61: 33-42. https://doi.org/10.1016/j.aap.2012.10.001

Campbell, J. L.; Lichty, M. G.; Brown, J. L.; Richard, C. M.; Graving, J. S.; Graham, J.; O'Laughlin, M.; Torbic, D.; Harwood, D. 2012. Human Factors Guidelines for Road Systems. National Cooperative Highway Research Program (NCHRP) Report 600. Transportation Research Board, Washington, DC, US. 319 p. Available from Internet: http://www.trb.org/Main/Blurbs/167909.aspx

Case, H. W.; Hulbert, S. F.; Mount, G. E.; Brenner, R. 1953. Effect of a roadside structure on lateral placement of motor vehicles, Highway Research Board Proceedings 32: 364-370.

Collins, J.; Fitzpatrick, K.; Bauer, K. M.; Harwood, D. W. 1999. Speed variability on rural two-lane highways, Transportation Research Record: Journal of the Transportation Research Board 1658: 60-69. https://doi.org/10.3141/1658-08

Dell'Acqua, G.; Busiello M.; Russo, F. 2013a. Safety data analysis to evaluate highway alignment consistency, Transportation Research Record: Journal of the Transportation Research Board 2349: 121-128. https://doi.org/10.3141/2349-14

Dell'Acqua, G.; Russo, F.; Mauro, R. 2013b. Validation procedure for predictive functions of driver behaviour on two-lane rural roads, European Transport Trasporti Europei 53: 1−13.

Dell'Acqua, G.; Russo, F. 2010. Speed factors on low-volume roads for horizontal curves and tangents, The Baltic Journal of Road and Bridge Engineering 5(2): 89-97. https://doi.org/10.3846/bjrbe.2010.13

Drew, D. R. 1968. Traffic Flow Theory and Control. McGraw Hill. 463 p.

Eboli, L.; Guido, G.; Mazzulla, G.; Pungillo, G. 2017. Experimental relationships between operating speeds of successive road design elements in two-lane rural highways, Transport 32(2): 138−145. https://doi.org/10.3846/16484142.2015.1110831

Esposito, T.; Mauro, R.; Russo, F.; Dell'Acqua, G. 2011. Speed prediction models for sustainable road safety management, Procedia - Social and Behavioral Sciences 20: 568-576. https://doi.org/10.1016/j.sbspro.2011.08.063

Figueroa Medina, A. M.; Tarko, A. P. 2005. Speed factors on twolane rural highways in free-flow conditions, Transportation Research Record: Journal of the Transportation Research Board 1912: 39−46. https://doi.org/10.1177/0361198105191200105

Fitzpatrick, K.; Collins, J. M. 2000. Speed-profile model for twolane rural highways, Transportation Research Record: Journal of the Transportation Research Board 1737: 42−49. https://doi.org/10.3141/1737-06

Fitzpatrick, K.; Elefteriadou, L.; Harwood, D. W.; Collins, J. M.; McFadden, J.; Anderson, I. B.; Krammes, R. A.; Irizarry, N.; Parma, K. D.; Bauer, K. M.; Passetti, K. 2000a. Speed Prediction for Two-Lane Rural Highways. Report No FHWARD-99-171. Federal Highway Administration (FHWA), US Department of Transportation, Washington, DC, US. 213 p. Available from Internet: https://www.fhwa.dot.gov/publications/research/safety/ihsdm/99171

Fitzpatrick, K.; Wooldridge, M. D.; Tsimhoni, O.; Collins, J. M.; Green, P.; Bauer, K. M.; Parma, K. D.; Koppa, R.; Harwood, D. W.; Anderson, I.; Krammes, R. A.; Poggioli, B. 2000b. Alternative Design Consistency Rating Methods for TwoLane Rural Highways. FHWA-RD-99-172. Federal Highway Administration (FHWA), US Department of Transportation, Washington, DC, US. 154 p. Available from Internet: https://www.fhwa.dot.gov/publications/research/safety/ihsdm/99172

Fitzsimmons, E. J.; Kvam, V.; Souleyrette, R. R.; Nambisan, S. S.; Bonett, D. G. 2013a. Determining vehicle operating speed and lateral position along horizontal curves using linear mixedeffects models, Traffic Injury Prevention 14(3): 309-321. https://doi.org/10.1080/15389588.2012.701356

Fitzsimmons, E. J.; Souleyrette, R. R.; Nambisan, S. S. 2013b. Measuring horizontal curve vehicle trajectories and speed profiles: pneumatic road tube and video methods, Journal of Transportation Engineering 139(3): 255-265. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000501

Glennon, J. C.; Neuman, T. R.; Leisch, J. E. 1983. Safety and Operational Considerations for Design of Rural Highway Curves. FHWA-RD-83-035. Federal Highway Administration (FHWA), US Department of Transportation, Washington, DC, US. 339 p.

Gong, H.; Stamatiadis, N. 2008. Operating speed prediction models for horizontal curves on rural four-lane highways, Transportation Research Record: Journal of the Transportation Research Board 2075: 1−7. https://doi.org/10.3141/2075-01

Gunay, B. 2003.

METHODS to quantify the discipline of lanebased-driving, Traffic Engineering & Control 44(1): 26-31.

Gunay, B. 2004. An investigation of lane utilisation on Turkish highways, Proceedings of the Institution of Civil Engineers - Transport 157(1): 43-49. https://doi.org/10.1680/tran.2004.157.1.43

Gunay, B. 2007. Car following theory with lateral discomfort, Transportation Research Part B: Methodological 41(7): 722-735. https://doi.org/10.1016/j.trb.2007.02.002

Gunay, B. 2009. Rationality of a non-lane-based car-following theory, Proceedings of the Institution of Civil Engineers - Transport 162(1): 27-37. https://doi.org/10.1680/tran.2009.162.1.27

Hashim, I. H.; Abdel-Wahed, T. A.; Moustafa, Y. 2016. Toward an operating speed profile model for rural two-lane roads in Egypt, Journal of Traffic and Transportation Engineering (English Edition) 3(1): 82-88. https://doi.org/10.1016/j.jtte.2015.09.005

IRC: 73-1980. Geometric Design Standards for Rural (Non-Urban) Highways. New Delhi, The Indian Roads Congress (IRC).

Islam, M. N.; Seneviratne, P. N. 1994. Evaluation of design consistency of two-lane rural highways, ITE Journal 64(2): 28-31.

Jacob, A.; Anjaneyulu, M. V. L. R. 2013. Operating speed of different classes of vehicles at horizontal curves on two-lane rural highways, Journal of Transportation Engineering 139(3): 287-294. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000503

Kerman, J. A.; McDonald, M.; Mintsis, G. A. 1982. Do vehicles slow down on bends? A study into road curvature, driver behaviour and design, in Transportation Planning Practice: Proceedings for Seminar held at the PTRC Summer Annual Meeting, 12-15 July 1982, Coventry, UK, 57-67.

Khan, S. I.; Maini, P. 1999. Modeling heterogeneous traffic flow, Transportation Research Record: Journal of the Transportation Research Board 1678: 234-341. https://doi.org/10.3141/1678-28

Krammes, R. A.; Brackett, R. Q.; Shafer, M. A.; Ottesen, J. L.; Anderson, I. B.; Fink, K. L.; Collins, K. M.; Pendleton, O. J.; Messer, C. J. 1995. Horizontal Alignment Design Consistency for Rural Two-Lane Highways. FHWA-RD-94-034. Federal Highway Administration (FHWA), US Department of Transportation, Washington, DC, US. 140 p.

Lamm, R.; Choueiri, E. M. 1987. Recommendations for evaluating horizontal design consistency based on investigations in the state of New York, Transportation Research Record: Journal of the Transportation Research Board 1122: 68-78.

Lamm, R.; Choueiri, E. M.; Hayward, J. C.; Paluri, A. 1988. Possible design procedure to promote design consistency in highway geometric design on two-lane rural roads, Transportation Research Record: Journal of the Transportation Research Board 1195: 111-122.

Lamm, R.; Choueiri, E. M.; Mailaender, T. 1990. Comparison of operating speeds on dry and wet pavements of two-lane rural highways, Transportation Research Record: Journal of the Transportation Research Board 1280: 199-207.

Lamm, R.; Psarianos, B.; Choueiri, E. M.; Soilemezoglou, G. 1998. A practical safety approach to highway geometric design international case studies: Germany, Greece, Lebanon, and the United States, in International Symposium on Highway Geometric Design Practices: Conference Proceedings, 30 August-1 September 1995, Boston, Massachusetts, US, 9-1-9-14.

Mahapatra, G.; Maurya, A. K. 2013. Study of vehicles lateral movement in non-lane discipline traffic stream on a straight road, Procedia - Social and Behavioral Sciences 104: 352-359. https://doi.org/10.1016/j.sbspro.2013.11.128

Mallikarjuna, C.; Rao, K. R. 2011. Heterogeneous traffic flow modelling: a complete methodology, Transportmetrica 7(5): 321−345. https://doi.org/10.1080/18128601003706078

Mathew, T. V.; Munigety, C. R.; Bajpai, A. 2015. Strip-based approach for the simulation of mixed traffic conditions, Journal of Computing in Civil Engineering 29(5). https://doi.org/10.1061/(ASCE)CP.1943-5487.0000378

May, A. D. 1959. Friction concept of traffic flow, in Proceedings of the Thirty-Eighth Annual Meeting of the Highway Research Board, 5-9 January 1959, Washington, DC, US, 493-510.

McFadden, J.; Elefteriadou, L. 2000. Evaluating horizontal alignment design consistency of two-lane rural highways: development of new procedure, Transportation Research Record: Journal of the Transportation Research Board 1737: 9-17. https://doi.org/10.3141/1737-02

Memon, R. A.; Khaskheli, G. B.; Qureshi, A. S. 2008. Operating speed models for two-lane rural roads in Pakistan, Canadian Journal of Civil Engineering 35(5): 443-453. https://doi.org/10.1139/L07-126

Misaghi, P.; Hassan, Y. 2005. Modeling operating speed and speed differential on two-lane rural roads, Journal of Transportation Engineering 131(6): 408-418. https://doi.org/10.1061/(ASCE)0733-947X(2005)131:6(408)

Nama, S.; Maurya, A. K.; Maji, A.; Edara, P.; Sahu, P. K. 2016. Vehicle speed characteristics and alignment design consistency for mountainous roads, Transportation in Developing Economies 2: 23. https://doi.org/10.1007/s40890-016-0028-3

Passetti, K. A.; Fambro, D. B. 1999. Operating speeds on curves with and without spiral transitions, Transportation Research Record: Journal of the Transportation Research Board 1658: 9-16. https://doi.org/10.3141/1658-02

Pérez-Zuriaga, A. M.; Camacho-Torregrosa, F. J.; García, A. 2013. Tangent-to-curve transition on two-lane rural roads based on continuous speed profiles, Journal of Transportation Engineering 139(11): 1048-1057. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000583

Pérez-Zuriaga, A. M.; García, A.; Camacho-Torregrosa, F. J.; D'Attoma, P. 2010. Modeling operating speed and deceleration on two-lane rural roads with global positioning system data, Transportation Research Record: Journal of the Transportation Research Board 2171: 11-20. https://doi.org/10.3141/2171-02

Poe, C. M.; Tarris, J. P.; Mason, J. M. 1996. Relationship of Operating Speeds to Roadway Geometric Design Speeds. FHWARD-96-024. Federal Highway Administration (FHWA), US Department of Transportation, Washington, DC, US. 268 p.

Polgár, J.; Tettamanti, T.; Varga, I. 2013. Passenger number dependent traffic control in signalized intersections, Periodica Polytechnica Civil Engineering 57(2): 201-210. https://doi.org/10.3311/PPci.7175

Rawson, C. T. 2015. Procedures for Establishing Speed Zones. Manual Notice 2015-1. Texas Department of Transportation, Austin, Texas, US. 89 p. Available from Internet: http://onlinemanuals.txdot.gov/txdotmanuals/szn/szn.pdf

Russo, F.; Biancardo, S. A.; Busiello, M. 2016. Operating speed as a key factor in studying the driver behaviour in a rural context, Transport 31(2): 260-270. https://doi.org/10.3846/16484142.2016.1193054

Russo, F.; Fric, S.; Biancardo, S. A.; Gavran, D. 2015. Driver speed behavior on circular curves of undivided two-lane rural roads: Serbian and Italian case studies, Transportation Research Record: Journal of the Transportation Research Board 2472: 117-128. https://doi.org/10.3141/2472-14

Schurr, K. S.; McCoy, P. T.; Pesti, G.; Huff, R. 2002. Relationship of design, operating, and posted speeds on horizontal curves of rural two-lane highways in Nebraska, Transportation Research Record: Journal of the Transportation Research Board 1796: 60-71. https://doi.org/10.3141/1796-07

Steyer, R. 1998. Design criteria for curves on two-lane rural highways, in International Symposium on Highway Geometric Design Practices: Conference Proceedings, 30 August-1 September 1995, Boston, Massachusetts, US, 25-1-25-8.

Taragin, A.; Leisch, L. E. 1954. Driver performance on horizontal curves, in Proceedings of the Thirty-Third Annual Meeting of the Highway Research Board, 12-15 January 1954, Washington, DC, US, 446-466.

Tettamanti, T.; Varga, I. 2014. Mobile phone location area based traffic flow estimation in urban road traffic, Advances in Civil and Environmental Engineering 1(1): 1−15.

Torbic, D. J.; Harwood, D. W.; Gilmore, D. K.; Pfefer, R.; Neuman, T. R.; Slack, K. L.; Hardy, K. K. 2004. Guidance for Implementation of the AASHTO Strategic Highway Safety Plan. Volume 7: A Guide for Reducing Collisions on Horizontal Curves. National Cooperative Highway Research Program (NCHRP) Report 500. Transportation Research Board (TRB), Washington, DC, US. 85 p. https://doi.org/10.17226/13545

TRB. 2010. Highway Capacity Manual. 5th edition. Transportation Research Board (TRB), Washington, DC, US. 1650 p.

Voigt, A. 1996. Evaluation of Alternative Horizontal Curve Design Approaches for Rural Two-Lane Highways. Report No 046903. Texas Transportation Institute, Texas A&M University System, Arlington, TX, US. 110 p. Available from Internet: https://static.tti.tamu.edu/tti.tamu.edu/documents/04690-3.pdf

Voigt, A.; Krammes, R. A. 1996. An operational and safety evaluation of alternative horizontal curve design approaches on rural two-lane highways, in International Symposium on Highway Geometric Design Practices: Conference Proceedings, 30 August-1 September 1995, Boston, Massachusetts, US, 11-1-11-8.

Watters, P.; O'Mahony, M. 2007. The relationship between geometric design consistency and safety on rural single carriage-ways in Ireland, in Proceedings of the European Transport Conference (ETC) 2007, 17-19 October 2007, Leiden, The Netherlands, 1-15.


Language: en

Keywords

four-lane divided highway; horizontal curve; nomogram; operating speed; passenger car; speed prediction model; weak lane discipline

NEW SEARCH


All SafetyLit records are available for automatic download to Zotero & Mendeley
Print