Citation

Xu X, Zhang F. Fire (Basel) 2023; 6(9): e368.

Copyright

(Copyright © 2023, MDPI: Multidisciplinary Digital Publications Institute)

DOI

10.3390/fire6090368

PMID

unavailable

Abstract

Coal spontaneous combustion (CSC) is a serious threat to the safe mining of coal resources, and the selection of suitable gas indicators to predict the CSC state is crucial for the prevention and control of coal mine fires. In this paper, the temperature-programmed experiment of CSC was first carried out to analyze the gas components and compositions in the oxidative pyrolysis process of three coal samples (lignite, long-flame coal, and lean coal) with different coalification degrees. Subsequently, the spontaneous combustion tendency of these three coal samples was evaluated. Finally, through the variation of gas concentration, gas concentration ratio, and fire coefficient with coal temperature, the indicators suitable for predicting the spontaneous combustion of coal were preferred, and a multi-parameter indicator system was established to make a comprehensive judgment on the spontaneous combustion status of coal. The results show that coal rank is negatively correlated with oxygen consumption rate. The higher the coalification degree of coal, the slower the oxidation reaction and the later the characteristic temperature point appears. The lignite selected in this experiment is a type of coal that is more prone to spontaneous combustion than long-flame coal and poor coal, and the CO concentration, C2H6/CH4, and second fire coefficient R2 can be used as the main indicators for predicting CSC, while the other gases, olefin-alkane ratio and fire coefficient can be used as auxiliary indicators. To some extent, the research content can effectively and accurately determine the stage and degree of coal spontaneous combustion, which has a certain guiding role in predicting CSC.

Language: en

Keywords

coal spontaneous combustion; fire coefficient; forecast indicators; indicator gases; temperature programmed system