Citation

Garner GR, Deen RC. Highw. Res. Board bull. 1973; 432: 1-11.

Copyright

(Copyright © 1973, National Research Council (U.S.A.), Highway Research Board)

DOI

unavailable

PMID

unavailable

Abstract

The purpose of this study was to compare the accident histories of different median types and to provide verification of generally recommended median widths and slopes. A major limitation of the analyses was the small number of possible combinations of median width and cross slope available for study.

The analyses reported provided evidence from accident histories to support the general requirement that wider medians are safer medians. It was indicated that medians should be a minimum of 30-40 feet wide for high speed facilities and that flat slopes should be provided; 4:1 slopes are inadequate for medians less than 60 feet wide. There was an indication that 6:1 or flatter slopes should be used. Raised medians provided an unsuitable vehicle recovery area on rural highways and were also undesirable from the standpoint of roadway surface drainage. The irregular interstate medians which result from independent roadway alignment should be used only with adequate clear zones in the median. Twelve-foot shoulders should be provided where guardrail is to be used.

Language: en

Keywords

HIGHWAY SYSTEMS; HIGHWAY ACCIDENTS