Citation

Dutta T, King EC, Holliday PJ, Gorski SM, Fernie GR. Disabil. Rehabil. Assist. Technol. 2011; 6(1): 67-76.

Affiliation

550 University Avenue, Toronto, Ontario, M5G 2A2, Canada.

Copyright

(Copyright © 2011, Informa - Taylor and Francis Group)

DOI

10.3109/17483107.2010.509885

PMID

20690862

Abstract

Purpose. To determine the minimum dimensions needed to allow five models of powered mobility scooters to manoeuvre within five commonly encountered indoor spatial configurations. Method. We measured manoeuvrability of five scooters judged by their manufacturers to have a good combination of indoor mobility and outdoor performance (including in rural environments). We determined the minimum space needed to manoeuvre the scooters through the following five spatial configurations: turning 180 degrees in a corridor, performing U-turns around 50 mm (2'') and 1200 mm (4') obstacles, turning 90 degrees from a doorway and approaching a counter or work surface from the side. Free-standing styrofoam walls were used to define each configuration. An expert driver repeatedly manoeuvred the scooters through each configuration while we incrementally decreased the dimension of interest until it was no longer possible to complete the manoeuvre. Each scooter's turning diameter was also measured and compared to the manufacturer's specification. Results. Minimum space requirements for each scooter for five spatial configurations are given and compared to existing standards. Conclusions. None of the scooters tested were capable of completing all manoeuvres within the space allowed by existing standards. These findings will contribute to recommendations for new standards for built environments that can accommodate scooter users.

Language: en